Drinking oil

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mine loses about 1/2 litre every couple hundred miles, but it comes out the bottom when hot im sure!

No smoke to speak of.

Are you sure it's not leaking at all?!
 
Although I must say at 110k a rover v8 has every chance of being well past its sell by date so you may just have to rebore and be happy

Cheers Sam
 
Ok, so I ring the garage this morning to ask why they didn't call me yesterday with prices.

The guy says he hasn't had time, and waffled on about it not being an easy or quick fix and that it was going to expensive.... I then said that there was no issue with any of that, but would it be possible to check the car out for rust as if its sound I'll go full steam ahead, but if theres any rust I'll cut my losses. He then goes on in a real negative manner that he's going to have to put the car back on the ramp to check and thats not going to be immediate... bla bla bla...

Anyway, I've told him that as he has no interest in doing anything with the car I will pick it up within 24 hours.

The garage is Lingley Autos at Gemini in Warrington.

Avoid like the plague.
 
ATD said:
Interesting. What would the benefit of this be?
Click to expand...

it's thicker, so if the engines worn it might not get past the seals/rings as much.

if you are going to scrap the engine/run into the ground, then might be worth as a temp fix
 
trax said:
it's thicker, so if the engines worn it might not get past the seals/rings as much.

if you are going to scrap the engine/run into the ground, then might be worth as a temp fix
Click to expand...

Nice one. I'll give that a go.
 
I tell you what we use at work with great success on bad burners/smokers

Wynn's oil treatment

It's basically glue in a can

Get it from Halfords, two tins of that and fill her up with fresh 20w50, if that don't slow it down I think you've got a hole in a piston :p
 
id agree with that, same engine more or less designed to run on 20w50 all those years ago so thin stuff not so great for them now especially with a lot of miles on them.
 
Mr Noisy said:
I tell you what we use at work with great success on bad burners/smokers

Wynn's oil treatment

It's basically glue in a can

Get it from Halfords, two tins of that and fill her up with fresh 20w50, if that don't slow it down I think you've got a hole in a piston :p
Click to expand...

Nice one.
 
I seem to remember checking the specs for halfords classic 20w50 and deciding it was ****. Many including myself use valvoline 20w50 vr1 but may work out expensive in your case. Check the api or acea oil spec in your manual
 
Halfords classic is ****.

I used to use comma sonic but it has morphed into comma x-flow

Lots of zinc and phosphorus content

Valvoline is a good shout but personally I prefer old fashioned mineral
 
They have ditched sonic and rebranded

I **** myself cos I thought they'd ditched it all together, but it has been replaced with a similar item

The zinc and phosphorus levels were high so it's the same stuff

Found out some info though whilst I was digging

Car oils have the metal contents limited and sonic is nearly on the limits, but motorcycle oils have no such limit

You can buy 20w50 for bikes with double the ZDDP content of sonic!!
 
You must log in or register to reply here.

Similar threads

J
Oil Consumption 2016 Defender
Replies
4
Views
979
Wimblowdriver
Wimblowdriver
dag019
200tdi dropped its oil!
2 3
Replies
41
Views
3K
dag019
dag019
C
Intermittent white smoke and diesel in oil engine
Replies
2
Views
509
miktdish
miktdish
H
Smokey MsSmokerson - blue smoke?
Replies
4
Views
533
freelance
freelance
B
Freelander 2 (LR2) Freelander 2 coolant issues
Replies
6
Views
711
GrumpyGel
GrumpyGel
Back
Top