Drag Link Question...

drscoundrel · Sep 25, 2014

Hey guys, need to change my drag link (full assembly) so ordered one from local motor factor. When i collected it there was no bracket for the damper. On their books it states that this is for right hand drive vehicles but the one for left hand drive vehicles has the bracket!! Is there a difference between a right hand and left hand drag link? It looks exactly like the one on mine. Need it on for the NCT tomorrow night...cheers

Grit Valve · Sep 25, 2014

It should have a damper bracket !

stopover · Sep 25, 2014

As Grit Valve says, should have the bracket. Just a tip - when you get a complete drag link make sure that the adjuster is free before fitting and don't drive without it being tightened up. Lots of threads on how to centre your steering wheel and align with the marks on the steering box.
Could be someone has sent you a track rod and not a drag link ??

Look here to see if you have the right one:
http://www.ebay.co.uk/itm/like/2715...1=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0

wammers · Sep 25, 2014

ANR3824 R/H drive drag link. ANR3825 L/H drive drag link. ANR3826 Track rod L/H and R/H drive.

Drag Link Question...

drscoundrel

Member

Grit Valve

2000 4.6 Vouge

stopover

Active Member

wammers

No longer with us, RIP

Similar threads