DOUBLE WOODEN CAR PORT & MUSIC STUDIO BUILD

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dewalt cordless mini saw and nail gun have been superb throughout, cant use paslode's the gas makes me feel sick.
Picca pencil n wax markers are now on my fav list as well.
IF I never see another roofing square ( its a triangle ) it will be too soon.....
 
Last edited:
KISSMYAURA said:
Dewalt cordless mini saw and nail gun have been superb throughout, cant use paslode's the gas makes me feel sick.
Picca pencil n wax markers are now on my fav list as well.
IF I never see another roofing square ( its a triangle ) it will be too soon.....
Click to expand...

Nice job looks crackin, I know what your saying about the paslode gas it smells worse when the gas is out
of date. Ive got the dewalt nail guns. Ive just got my planning though yesterday for my garage fkn 2 years & an archaeologist cause we live in a historical place which dates back to the 10th century.
No chance they'd find anything I dug it up years ago then back filled it with 200 tonne of stone & hardcore lol. What size is you carport.
 
kevstar said:
Nice job looks crackin, I know what your saying about the paslode gas it smells worse when the gas is out
of date. Ive got the dewalt nail guns. Ive just got my planning though yesterday for my garage fkn 2 years & an archaeologist cause we live in a historical place which dates back to the 10th century.
No chance they'd find anything I dug it up years ago then back filled it with 200 tonne of stone & hardcore lol. What size is you carport.
Click to expand...
10m x 5mx 4.5m at apex
 
Screenshot 2022-08-20 at 08.59.11.jpg
 
A few modifications,

South end was going to be open, same as front.
Two post lift will site between middle posts, so when not in use arms will be swung in line and i can still park two cars inside, hence the south side being open to enable esy entrance to lift.
However decided close it in, plenty of room for a '5 point turn'

I am using EV cable instead of normal SWA, EV cable has Cat5 network cable built in, using a standard gland into the consumer.
I can then run a small POE ( Power over Ethernet) switch in the carport to power my WLAN AP,(wifi thingy) and IP CCTV, providing wifi and hard wired networking to the car port.
I have no plans for an electric vehicle by the way.......
Screenshot 2022-08-20 at 09.30.47.jpg


View attachment 271942
Screenshot 2022-08-20 at 09.07.31.jpg
 
KISSMYAURA said:
10m x 5mx 4.5m at apex
Click to expand...

Good size is that, mines will be 8m L x 6.6 W same height as yours. Planning made me reduce mine
as they wanted space at the front for parking o_O What for I want my cars inside ffs.
Stupid bint from planning why do you want a garage that size, cause I have loads of scrap landys luv.
Then at the site meeting she turned up in a 90 & wanted to be my pal. :rolleyes:
 
Steels n fixings etch primed,
It will all be covered with cladding, but it is damp as fook here in the woods in the winter.
Will be fitting some sort of vapour barrier for top floor, ashla walls etc.
Trapdoor will be fun trying to work out how to get a decent vapour and thermal seal

signal-2022-08-26-183338_008.jpeg
signal-2022-08-26-183338_007.jpeg
 
Last edited:
You must log in or register to reply here.

Similar threads

D
K Series Guide/ Build Log
Replies
7
Views
2K
DanielG
D
FlatbedPilot
Rick's New Disco, Very Nice. 2001 TD5 ES Auto.
2
Replies
20
Views
2K
FlatbedPilot
FlatbedPilot
300bhp/ton
P38A Should you lift a Range Rover? Air/Coil?
4 5 6
Replies
108
Views
14K
300bhp/ton
300bhp/ton
Alibro
Clutch change in a TD4 (list of jobs to do)
2
Replies
30
Views
13K
NUM427F
N
Hippo
  • Sticky
HippoRamps - How To Guide
Replies
6
Views
28K
willie j.
W
Back
Top