Rhode rover
Active Member
- Posts
- 73
- Location
- Rhode Island, USA
Double mounts
- Thread starter Rhode rover
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 34,062
- Location
- North Shropshire
That's because you have a series 3? The only s2 bit in the pic is the bonnet
Last edited:
steve2286w
Well-Known Member
- Posts
- 4,596
- Location
- monkeyangerland
That is a bit weird as the S2 and S2a has those flat outer bits and as said you also have the wider hinges just inside them , don’t know
- Posts
- 34,062
- Location
- North Shropshire
The outer bit looks like it's part of the door top? Mirror mount?
agreed, looks a little low to be the windscreen mount, some closer pics of the area would certainly be beneficial.
steve2286w
Well-Known Member
- Posts
- 4,596
- Location
- monkeyangerland
All Land Rover Bulkheads | Shielder Chassis
Explore our range of Land Rover Bulkheads at competitive prices, available at Shielder UK.
shielderchassis.com
Have a look at the S2 bulkheads on here, then the series 3
Rhode rover
Active Member
- Posts
- 73
- Location
- Rhode Island, USA
This the best photo that I have available.
Rhode rover
Active Member
- Posts
- 73
- Location
- Rhode Island, USA
It welded to windshield sash side.
Maybe it was almost a good idea for a mirror at one time. Just had me nervous it was some kind of Frankenstein bulkhead refit
steve2286w
Well-Known Member
- Posts
- 4,596
- Location
- monkeyangerland
Fantastic looking landy either way
Rhode rover
Active Member
- Posts
- 73
- Location
- Rhode Island, USA
Just don't look underneath...
Needs alot
Needs alot
Rhode rover
Active Member
- Posts
- 73
- Location
- Rhode Island, USA
Thank you just the same
- Posts
- 34,062
- Location
- North Shropshire
I'll get a pic of mine tomorrow in the light.. it's a 1962 S2A.. with a few S2 bits on it
Rhode rover
Active Member
- Posts
- 73
- Location
- Rhode Island, USA
That makes a lot of sense. I know the previous owner used it hunting, camping etc. Also it has the same type of brackets welded to the rear bumper. A plausible answer for brackets would be some kind of home make rack system.
Thanks for the help.
Thanks for the help.
