Hippo
Lord Hippo
- Posts
- 53,856
Chuck water on when frozen and they will fall oft.
P38A Doors froze shut last night
- Thread starter Flossie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 33,606
- Location
- North Shropshire
you cant chuck water when its frozen, it will be stuck in the bucket
Hippo
Lord Hippo
- Posts
- 53,856
If it's fresh out the kitchen tap it won't be frozen.you cant chuck water when its frozen, it will be stuck in the bucket
- Posts
- 33,606
- Location
- North Shropshire
Butcher sed chuckit wen its froz
Datatek
Well-Known Member
- Posts
- 44,896
- Location
- Near Poitiers SW France
- Posts
- 12,636
- Location
- Sud ouest France !
You can also turn the screen heat button on and shut the front and rear screens off via their buttons and this super heats the cabin quickly
- Posts
- 33,606
- Location
- North Shropshire
eh?You can also turn the screen heat button on and shut the front and rear screens off via their buttons and this super heats the cabin quickly
turn the heated screens on, then turn them off?
- Posts
- 12,636
- Location
- Sud ouest France !
Yep, as you read it, turn on the screen program, then turn off the rear screen and the front screen leaving it in screen heat mode and it'll heat the cabin fast.
On the P38 that is. 
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
get some gummi pledge spray by liquid moly, amazon, like the budgie...... cheap and betterer than sillycone.
dont use vaseline unless you want to dissolve yer rubbers lol
- Posts
- 33,606
- Location
- North Shropshire
ahhh you mean the defrost button?Yep, as you read it, turn on the screen program, then turn off the rear screen and the front screen leaving it in screen heat mode and it'll heat the cabin fast.
sets the fan to max and internal re-circulation.. thats all
- Posts
- 33,606
- Location
- North Shropshire
thats probably got silicone in it.. most cheap spray polishes doget some gummi pledge spray by liquid moly, amazon, like the budgie...... cheap and betterer than sillycone.
dont use vaseline unless you want to dissolve yer rubbers lol
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
graphite powder or spray,Thanks. I'll give it a shot. Now just to find something that will work with the locks
Never wd40 or oil......is not a good call, works fine on a padlock but just gums up car door locks. google it or ask a locksmith they will say the same!
KISSMYAURA
Well-Known Member
- Posts
- 2,799
- Location
- KENT
its not cheap elsewhere, spesh in germany, Liqyud Moly is not a cheap brand, but for some reason omnipart or amazon ave it cheap, i dare say it has some silcone in it but its a rubber lube and restorer primarily. I used it in northern Sweden, its the go to anti door sticking agent there, @ -34 if if works there it will work anywhere!
Datatek
Well-Known Member
- Posts
- 44,896
- Location
- Near Poitiers SW France
Do you mean press the "Program button" then turn the heated screens off?Yep, as you read it, turn on the screen program, then turn off the rear screen and the front screen leaving it in screen heat mode and it'll heat the cabin fast.
- Posts
- 12,636
- Location
- Sud ouest France !
That's the one kiddo
it works great on me bus.
- Posts
- 12,636
- Location
- Sud ouest France !
Yip...
Datatek
Well-Known Member
- Posts
- 44,896
- Location
- Near Poitiers SW France
I use it regularly this time of year but leave the headed screens on in the belief that the extra load on the engine will warm it up quicker. The heated windscreen only has 2 lines that worth so turning it off would make little difference.
- Posts
- 12,636
- Location
- Sud ouest France !
I agree, I turn the screens off if not needed so the alt isn't trying to do too much.
- Posts
- 33,606
- Location
- North Shropshire
Oh dear
Datatek
Well-Known Member
- Posts
- 44,896
- Location
- Near Poitiers SW France
Not a necessary feature here, different in Canada with minus 40COh dear
