Door strikers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
N

norried

Active Member
Posts
210
Location
Stow
Ok so my Series 3 had Defender doors when I bought it and I have reverted to Series 3 doors. I see that the strikers are completely different. Do I just need the new striker plates or will I need anything else? Also are they normally shimmed or just bolt straight on?
Thanks.
Norrie .
 
Oh and I found out that there shimmed but the shims are £18 each so will be making my own. lol.
The new strikers are only £3 each.
Norrie
 
norried said:
Oh and I found out that there shimmed but the shims are £18 each so will be making my own. lol.
The new strikers are only £3 each.
Norrie
Click to expand...
Definitely make your own, although one side on mine is bolted straight on, so you may find you don't need any.
 
norried said:
Ok so my Series 3 had Defender doors when I bought it and I have reverted to Series 3 doors. I see that the strikers are completely different. Do I just need the new striker plates or will I need anything else? Also are they normally shimmed or just bolt straight on?
Thanks.
Norrie .
Click to expand...

Depends if they are antiburst or not.
 
As has been said you may or not need shims you just have to fettle it till it is right and the door shuts ok. The new (or rather old style) strikers may also need to have the holes redrilled in the body to fit them, at least I had that problem when I did mine.
 
I had the same reaction when I found the shims were £18, made my own in a few minuits, but the cast striker is really good value, makes no sense.
 
You must log in or register to reply here.

Similar threads

A
90 / 110 door striker
Replies
6
Views
585
APLandy
A
H
Swap grill and headlights from 2A to 3
Replies
4
Views
782
Tony Monsantoe
Tony Monsantoe
A
One Piece Door Seals
Replies
9
Views
791
dag019
dag019
C
Fuel Lines Diameter
Replies
10
Views
499
Anaconda
A
O
Body Alignment Help Needed
Replies
17
Views
3K
catman275
catman275
Back
Top