P38A Door Loom replacement

monkfish24 · Feb 10, 2019

I've got a few snapped cables in the door Loom on the driver's side. It's right inside the rubber boot in the door shut.

It's easier to change the loom or pull the loom out to repair it. Does anyone happen to know where the plug is on the vehicle side of the loom?

mozz smith · Feb 10, 2019

if its the door loom half way up the door frame I think the connectors to the front loom is up behind the facia of the on the right of the dashboard , trace it through with your fingertips to the connector and if memory serves me right theres a panel underneath that reveals all , hope this helps cheers mozz

siddeley · Feb 10, 2019

Hi..this may be of help to you. if not too damaged perhaps a repair.
Best wishes.

monkfish24 · Feb 11, 2019

Mozzy and Siddeley, thanks for the help.

I went to the scrapyard today and there are 2 P38s there, unfortunately, wrong colour interiors so no drivers seat for me but the door looms looked good, so, I had them. The body side of the disconnection is directly under the rubber boot in the door shut. So all that's needed is to pull the rubber boot of the body, pull the loom out and two connectors appear!

simples!

P38A Door Loom replacement

monkfish24

Well-Known Member

mozz smith

Well-Known Member

siddeley

Member

Attachments

monkfish24

Well-Known Member

Similar threads