Door lock not coming out
- Thread starter Bobby5
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,220
- Location
- west wales coast
Depending on the maker don't think it is a removable part.
Hicap phill
Well-Known Member
- Posts
- 16,640
- Location
- Wiltshire
Is that a pressed on star washer?
I am quite new what is this
Hicap phill
Well-Known Member
- Posts
- 16,640
- Location
- Wiltshire
Try this…
Change the orientation of that arm,should be able to move the door handle out and slide that out.
They are fitted for the door handle new so no need to remove
Change the orientation of that arm,should be able to move the door handle out and slide that out.
They are fitted for the door handle new so no need to remove
tottot
Well-Known Member
- Posts
- 8,220
- Location
- west wales coast
Detail in pic not good enough to say but a star washer is made of spring steel and is a use once fitting.
- Posts
- 69,834
- Location
- The Wooly Witch
Hicap phill
Well-Known Member
- Posts
- 16,640
- Location
- Wiltshire
Turn the key & find the hole. Push a small drill/pop rivit/nail in to the hole to release the spring loaded ball.
- Posts
- 6,846
- Location
- uk
see attached ---
- Posts
- 6,846
- Location
- uk
And these ----
Anaconda
Well-Known Member
- Posts
- 4,256
- Location
- Thames Valley
Land Rover Defender PUMA Door Barrel Lock & Key Set post 2002 CWC500190 | eBay
Land Rover Defender Single. Door Barrel and Lock Set. Manufacturer's Part numbers are used for reference purposes only.
www.ebay.co.uk
You have to push it in through a hole in the housing. Think the key needs to be in the key hole and maybe turned to a certain position.
Key does need to be in the barrel, it does need to be turned to the correct orientation to line the pin up with the hole, and then even after doing all that the chances are it will still not come out if it is anything other than brand new and you will resort to drilling it out a anyway!See the little pin in the key barrel?Land Rover Defender PUMA Door Barrel Lock & Key Set post 2002 CWC500190 | eBay
Land Rover Defender Single. Door Barrel and Lock Set. Manufacturer's Part numbers are used for reference purposes only.www.ebay.co.uk
You have to push it in through a hole in the housing. Think the key needs to be in the key hole and maybe turned to a certain position.
Anaconda
Well-Known Member
- Posts
- 4,256
- Location
- Thames Valley
We're the early ones different? I changed the ones on the Ninety but can't remember what I did.
I don’t know. Mine is an early one, so that is what I am referencing. I don’t have fancy doors with up and down windows!
Hicap phill
Well-Known Member
- Posts
- 16,640
- Location
- Wiltshire
No, still have a little hole with sprung capture.
Only difference is later ones have an extender on the end of the lock barrels
