Door card help on a 90
- Thread starter doublem1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mrchurchill109
Active Member
- Posts
- 557
- Location
- Northeast US
There is a tool much like a tack puller for popping the retainers - this will help. Loosen the bottom first, removing any detatchabe handles and latch surrounds.
mrchurchill109
Active Member
- Posts
- 557
- Location
- Northeast US
I'm in the States otherwise I'd lend you mine...
These are a common item here at an auto-parts supplier, so i'd go to my local motor factor's and just ask for one - they're not terribly expensive.
On the eyebrows? Not a clue.
ajr
dkr110
Member
- Posts
- 16
- Location
- Thorne Doncaster
To remove the wheel arch mouldings I used a fine jewellers screw driver and pushed the centre of the rivet through its body. It allows you to pull the rest of the rivet body out.
Dave
Dave
I thought that was the most logical way to do so. How do you retrieve the rivets though?
dkr110
Member
- Posts
- 16
- Location
- Thorne Doncaster
Just pull em out with a screwdriver/pliers
