Does anyone use their P38 Offroad

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grrrrrr said:
Coil springs!
Click to expand...
:eek::eek::eek:...:rolleyes:
5333E724-FEAF-4B9E-8708-C94731393514.gif


Looks like Baptiste Pitoi’s P38?
If it is, it’s a V8

He’s French off-roader on Utube, lifted his Peugeot106 to go off-roading to it
 
IMG_20190607_203211.jpg
Overkill but very well thought out and on air. 4.0 V8, just the engine and gearbox ECU's.
The air is on two 2 valves. Front and rear. Lifted independently and using the original compressor to supply air.
11cm body lift and 15cm airbag stilts on the axles.
Mental, I spoke to the owner and he wasn't interested in supplying a kit to people who wanted to keep the bags but not have to deal with the air suspension system and its needs.
Some of us can but not everyone can repair or get to grips with it. This thing went over everything thrown at it.:cool:
 
Mark Piercy said:
View attachment 180876 Overkill but very well thought out and on air. 4.0 V8, just the engine and gearbox ECU's.
The air is on two 2 valves. Front and rear. Lifted independently and using the original compressor to supply air.
11cm body lift and 15cm airbag stilts on the axles.
Mental, I spoke to the owner and he wasn't interested in supplying a kit to people who wanted to keep the bags but not have to deal with the air suspension system and its needs.
Some of us can but not everyone can repair or get to grips with it. This thing went over everything thrown at it.:cool:
Click to expand...

He must have done something to the props running at that angle with that kind of lift?
 
willinone said:
i'm running mine on a Bearmach +2" lift kit with Bearmach Tuffback +20mm shocks. also have fitted 265 75 16 Maxxis Bighorn MT764. it drives very nice on the road with a bit of swaying(similar to my defender 90 when it got lifted). haven't yet tried it offroad, can't wait!

one particularly thing that Bearmach have forgotten with their kit is on the p38 the fuel tank and power steering box are on the drivers side which means you have to pop a little spacer below the springs on that side so it sits level. I believe the terrafirma kit has slightly longer springs on the on the drivers side to correct this.
Click to expand...
Do you have diff guards fitted
 
Bigsi234 said:
Do you have diff guards fitted
Click to expand...
Hi Bigsi,

I run mine on a 2"lift too - but just a body lift - which allows me to use Toyo Open Country M/T 255/85R16 tyres. I don't use a diff' guard with mine, and although I have grounded on the diff' a few times prior to fitting the bigger tyres - I have not done so since.

Nick
 
You must log in or register to reply here.

Similar threads

ukadamwest
P38A Farewell to another P38.. or hello ?
Replies
18
Views
2K
Grrrrrr
Grrrrrr
T
P38A P38 DSE Manual (non-EGR) No turbo boost
Replies
7
Views
678
Grrrrrr
Grrrrrr
Blob
L322 Solved - C1A13-64 (AF) Pressure does not decrease when venting gallery
Replies
2
Views
3K
stuu
stuu
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
394
xDParis64
xDParis64
Farmer Dan
Its a P38 V8!!!! I want to swap the engine :)
2
Replies
21
Views
5K
300bhp/ton
300bhp/ton
Back
Top