Bobthevalve
New Member
- Posts
- 3
- Location
- West London
Does anyone know what the initials E.N.V. actually stand for?
Series 2 Does anyone know what the initials E.N.V. actually stand for?
- Thread starter Bobthevalve
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 4,541
It's a Unix shell command (envelope) so you can run another utility in an altered environment.
www.abbreviations.com
What does ENV stand for?
Looking for the definition of ENV? Find out what is the full meaning of ENV on Abbreviations.com! 'Envelope' is one option -- get in to view more @ The Web's largest and most authoritative acronyms and abbreviations resource.
www.abbreviations.com
- Posts
- 33,600
- Location
- North Shropshire
its the name of the company that made the axle - Etablissements Normand-Violet Engineering Company. The name is French, after the founder, but later based in UK
- Posts
- 33,600
- Location
- North Shropshire
So there's a Frenchman wringing his hands every time he sees a LR, Saying to himself " got rid of that at the right time"
.J
- Posts
- 33,600
- Location
- North Shropshire
ENV axles were quite good, were they not? at least for the engine power of the timeSo there's a Frenchman wringing his hands every time he sees a LR, Saying to himself " got rid of that at the right time"
J
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
ENV diffs were fitted to Series 2b forward control model's when it was found rover ones not up to the job
Pretty much in the hen's teeth category today I recon.
Pretty much in the hen's teeth category today I recon.
saxavordian
Well-Known Member
- Posts
- 9,287
Evoque Not Valid 
I usually manage to break a half shaft every time I manage a good hard weekend of off roading.Yes.
I have yet to break a LR axle, broke a Marina 1 once
J
Doesn't actually break that weekend, usually lets go about a month later on the way to work.
You must be lucky enough to have some good quality half shafts in your axles
doriz
Well-Known Member
- Posts
- 17,312
Why did you have a Marina axle on your LR?Yes.
I have yet to break a LR axle, broke a Marina 1 once
J
Bobthevalve
New Member
- Posts
- 3
- Location
- West London
Thank you for your reply. That is most interesting.
Bobthevalve
New Member
- Posts
- 3
- Location
- West London
Thank you. Very interesting.
Rangieman123
Active Member
- Posts
- 112
- Location
- Dublin, Ireland
My understanding of ENV which I got from an old engineer friend of mine was that there was a collaboration between Eaton, Nuffield and Vauxhall back in the 60's making strong axles for light commercials, much like Dana did with theirs. These axles were available to all manufacturers and were used a lot by the British Army.
