85Santana3
Active Member
- Posts
- 284
- Location
- Canada
Series 3 Does anybody know what this is?
- Thread starter 85Santana3
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hicap phill
Well-Known Member
- Posts
- 16,249
- Location
- Wiltshire
It’s the bar for your jack.
tottot
Well-Known Member
- Posts
- 8,031
- Location
- west wales coast
There would be a wooden handle to slip through the hole to turn the rod and wind the jack.
85Santana3
Active Member
- Posts
- 284
- Location
- Canada
Thanks a 10000000 hicapPhill. I've been trying to crank with it for days 
Didn't come with any handles tottot. How does it look like? maybe I can make the handle
Didn't come with any handles tottot. How does it look like? maybe I can make the handle
Hicap phill
Well-Known Member
- Posts
- 16,249
- Location
- Wiltshire
Cranking handle looks like this
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
You can get the handles on eBay.Thanks a 10000000 hicapPhill. I've been trying to crank with it for days
Didn't come with any handles tottot. How does it look like? maybe I can make the handle
Col
Extreedoc
Well-Known Member
- Posts
- 505
- Location
- Leicestershire
The handle looks a little like a truncheon, a simple job to make one with a wood lathe or you could just use a bit of broom handle. 12" to 14" long approx.
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
Use an old screwdriver......
85Santana3
Active Member
- Posts
- 284
- Location
- Canada
It's good there is a photo in that ad. I was wondering if the curves in the one I found should be there or not. I will make it straight then,
thanks everybody.
Last edited:
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
If you've got a powerful cordless drill, you could weld a nut onto the Jack winding rod and Jack up the car with your drill. I do this on my motorbike lift.
Col
Col
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
Put the dog in a large hamster wheel? I'm all for getting someone else to do the hard work!
85Santana3
Active Member
- Posts
- 284
- Location
- Canada
I am surprised nobody has inventing anything like that which could be plugged into a cigarette lighter and jack the car up. Since nobody has I reserve the rights to this idea.
Last edited:
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
My bike lift is rated at 500kg, I use to raise the wife's car when need, it's quicker and easier than my big trolley JackI am surprised nobody has inventing anything like that which could be plugged into a cigarette lighter and jack the car up. Since nobody has I reserve the rights to this idea.
Col
Similar threads
