leg oot the bed
Active Member
- Posts
- 660
as title suggests really, thanks in advance
does a 90 bumper fit a s3 88
- Thread starter leg oot the bed
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
baggyjim
New Member
- Posts
- 2,063
- Location
- gillingham dorset
would of thought so as long as you have access to a grinder, welder and some spare bits of metal, but there again with that you could make a mk1 fiesta bumper fit 
leg oot the bed
Active Member
- Posts
- 660
thats what i thought really, mk1 fiesta bumper might not be up to the job though lol
arb78
Member
- Posts
- 49
- Location
- pembroke wales
i don't think there's a hole for the starting handle though.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
more approach angle gained as its closer to the rad panel by a few inches
johnny curt 1
Well-Known Member
- Posts
- 9,118
- Location
- manchester
yeah itll fit with next to no modifications near on any bumper yer can get for a fender will fit a series even most of the winch bumpers
leg oot the bed
Active Member
- Posts
- 660
its a 200tdi anyway so starting handle not an issue its winch bumpers ive been looking at
TheKeymeister
Active Member
- Posts
- 772
- Location
- Lincolnshire
My mate did the opposite so would suggest yes
Rob Anybody
One Loaf. Sliced
- Posts
- 223
- Location
- Suffolk
I fitted a military 90 front bumber, the one with the central towing point, to my SIII with a small mod to the bumber.
Using a 4" grinder I cut 2 short slots either side of each mounting bracket on the underside of the bumber to allow the front spring hangers to slot into. Other than that nothing else was required.
Using a 4" grinder I cut 2 short slots either side of each mounting bracket on the underside of the bumber to allow the front spring hangers to slot into. Other than that nothing else was required.
