Dodgy steering

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

Axlewhine

Member
Posts
10
Location
hailsham, east sussex
Morning all.
Recently bought a Series 3 109 & am not happy with the way it steers. I've had Landys before & know steering isn't brilliant, but this one is bad! Have replaced 6 track rod ends, checked relay & swivels for play, steering box is tight on mountings, no sign of external play in box but the damper & chassis bracket are missing. Do you think this may cause the steering to wander so much. Thanks in advance.
 
I doubt whether the absence of a damper will affect the wander. What tyres have you got on? I find crossplies wander more than 'modern' radials
 
My steering was dreadful on my 109 when I first got it. The problem was a combination of things. I replaced the track rod ends, had the tracking set, adjusted the steering box, replaced all the wheels and tyres and fitted a smaller steering wheel. It's still not brilliant but at least I can keep it in a straight line....nearly.

Col
 
I removed the damper on my series 88 as tester said steering too tight Years ago

I had a bit wandering and clunky steering Over potholes in last 2 weeks and just nipped up the big nuts a tad on the Drivers Side wheel bearing Also the drive member bolts were finger loose On both sides
Sorted the noise and wander
 
Get someone to rock the steering wheel whilst you look at the following for movement, 1 steering columnn upper clamp bracket under bonnet, steering rack support bracket to chassis, Steering relay in front chassis top and bottom arms and securing ring at steering relay base , each wheel hub trackrod to hub arms especially where they bolt to hub assembly.
Check steering relay actually has oil in it in its self is a damper.
 
Good shout Blackburn my mot man found that the 3 long bolts were loose on the steering support bracket to chassis and also the box to top of bracket bolts , one of them things you can’t Check alone
 
steve2286w said:
Good shout Blackburn my mot man found that the 3 long bolts were loose on the steering support bracket to chassis and also the box to top of bracket bolts , one of them things you can’t Check alone
Click to expand...
This happened to me, but I'm MOT exempt, found it by chance. Its impossible to check alone, I only found it because there were some rust streeks that made me look further. Bolts felt tight but were thread bound and not clamping.
 
You must log in or register to reply here.

Similar threads

S
110 TD5 steering play
Replies
8
Views
1K
v8250
v8250
C
R9 relay missing
Replies
5
Views
1K
mystery
mystery
Nigel the Disco
Discovery 2 steering box adjuster
Replies
1
Views
696
sierrafery
sierrafery
L
Steering Evolution
Replies
11
Views
1K
lasher99
L
D
FL2 Power steering strange issue after flywheel & clutch replacement.
Replies
0
Views
642
DanHughes92
D
Back
Top