nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
yes, when i called them a bloke told me they were only a warehouse and didnt do programming so i dunno
dodgy key fob
- Thread starter gilly 78
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,637
Strange because although I haven't used them it has been stated in various forums that the are very helpfull with alarm/fob problems.
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
I can only say what the bloke on the end of the phone told me
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
god dam it my two button no LED fob has packed up 
i tried a new battery but still no luck GRRRR my spare fob works fine so im thinking its the fob thats shot. now if i buy one off ebay or else where (new) then judging by what ive been reading here i cant program this new fob to work on my 1996 300 tdi i will have to go to a main dealer and pay a kings ransome to have it 'programmed' ? is there any way of doing it myself ?
i tried a new battery but still no luck GRRRR my spare fob works fine so im thinking its the fob thats shot. now if i buy one off ebay or else where (new) then judging by what ive been reading here i cant program this new fob to work on my 1996 300 tdi i will have to go to a main dealer and pay a kings ransome to have it 'programmed' ? is there any way of doing it myself ?
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
No, but i think you can resync the one you've changed the battery in unless it is shot
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
its shot now i threw it at the wall
i bought a new one from derbyshire land rover spares (DLS) and the total cost for a new fob and programming it was £35.19
very resonable i thought
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
£35 for fob and programming? 1 was quoted £57 just for programming robbing rastards.... whats the address for dls?its shot now i threw it at the wall
i bought a new one from derbyshire land rover spares (DLS) and the total cost for a new fob and programming it was £35.19
very resonable i thought
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
YWX101220 remote two button £22.00
tuning £10.00
nett total £32.00
VAT £4.80
grand total £36.80
DLS water lane,
wirksworth,
matlock,
derbyshire,
DE4 4AA
tel:01629 822185
website www.DLS-uk.co.uk
email [email protected]
the bloke who did it was real helpfull anorl !
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
Many thanks for that
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
called em today, told me to drop in £15 to programme the fob
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
Got my fob programmed today
£10 for new key cut, £15 for programming and £10 for the fob, £35 all in which aint a bargain but its a far cheaper than a stealers quote of £57 just to programme a fob bobbing rastards.
If i hadnt've done it i wud definately lost the original feckers
£10 for new key cut, £15 for programming and £10 for the fob, £35 all in which aint a bargain but its a far cheaper than a stealers quote of £57 just to programme a fob bobbing rastards.
If i hadnt've done it i wud definately lost the original feckers
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
Got my fob programmed today
£10 for new key cut, £15 for programming and £10 for the fob, £35 all in which aint a bargain but its a far cheaper than a stealers quote of £57 just to programme a fob bobbing rastards.
If i hadnt've done it i wud definately lost the original feckers
you got the fob for ten quid ? aint cheap ? dam it i payed 22 quid for me fob and programming cost me 36 quid
you got a key cut and all that was cheaper than what i got ya jammy sod
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
i got a good deal then? feel betta now thanks lol
feel betta now thanks lol
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
ffok me RobinT has just been quoted £111 +pennies to supply and program a 2 button fob.
PASTMASTER
Well-Known Member
- Posts
- 1,235
- Location
- S London
JLC main stealers in S London charged me £141,24 back in 1996. It's getting cheaper. They did throw in a battery for my other fob (although it still doesn't work properly).
fireman-andy
New Member
- Posts
- 222
- Location
- surrey
my d2 has a 2 button fob and an led. Mine recently stopped working and it was the receiver in the roof. I had to use the emergency key access code to get in and start it.
ZXpower
New Member
- Posts
- 9
- Location
- Riga, Latvia
I have similar problem - my D2 has two Valeo FOBs with keys - both works to open doors and start the engine (disable the immobiliser), but only one works as a remote to open/close doors. Other one just flushes the LED, but no door opening. Recently I was forced to change the car's battery because old one just run out and - probably - after that the one remote stopped to work. Due to that car is fresh bought I didn't paid attention to the problem when I was buying the car and now don't know what to do.
I have tried resyncing techniques described in this thread, but no luck. Any other suggestions what to do?
I have tried resyncing techniques described in this thread, but no luck. Any other suggestions what to do?
aviator
Active Member
- Posts
- 177
- Location
- Derbyshire
Cut from an earlier post...........................
A two button fob requires software to programme it, a single button fob is user programmable.
A two button fob requires software to programme it, a single button fob is user programmable.
ZXpower
New Member
- Posts
- 9
- Location
- Riga, Latvia
Damn... It means that I should collect some $$$ to get Nanocom. Maybe here is someone from Latvia who already has Nanocom?
