Disco 2 DLR lights
- Thread starter davec18
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
JUKE179r
Well-Known Member
- Posts
- 3,166
- Location
- Suffolkshire
I recently did this on my 2001 D2.
You will also need the XBL100200 DRL resistor that fits behind the LH headlight. You might have to turn on the DRL option with a Nanocom.
You will also need the XBL100200 DRL resistor that fits behind the LH headlight. You might have to turn on the DRL option with a Nanocom.
JUKE179r
Well-Known Member
- Posts
- 3,166
- Location
- Suffolkshire
Np.... glad to help.
I should have mentioned... make sure you have the wire connector with the jumper inside the area of the LH headlight. Mine was hidden under the wire bundles. This connector is where you will remove the jumper wire (mine was blue) and connect the DRL resistor.
I should have mentioned... make sure you have the wire connector with the jumper inside the area of the LH headlight. Mine was hidden under the wire bundles. This connector is where you will remove the jumper wire (mine was blue) and connect the DRL resistor.
Last edited:
Chers just got this disco 2 200 td5 as transport for my disabled wife easier to get in and out been around farm landy,s for years now have to try and remember all that I have forgotten lol Rebuilt a old series 1 land rover when I was at school as a project every nut and bolt rebuild including making bushes .
Feathers McGraw
Well-Known Member
- Posts
- 2,780
- Location
- Cumbria
I'm interested! Is it a low powered dip beam?
JUKE179r
Well-Known Member
- Posts
- 3,166
- Location
- Suffolkshire
Yes. The DRL works at, I’m guessing, half the voltage than dip beams. So half the illumination “and” the rear illumination lights aren’t on for a proper DRL system.
I’ve got LED bulbs and they still work well as DRLs.
