DK17
Banned
- Posts
- 777
- Location
- Redruth, Cornwall
OK, for the less intelligent, IE...you lot
I'm going to do this in numbered sections.
and you will need some red and white warning barriers and some rope
1. Clear a substantial area around your landrover and mark it with barriers so no one enters the work area, for health and safety guidelines this area needs to be about 50 yards
2. stand in front of your landrover, S1/S2/S2a/S3, whichever one you have
3. locate the catch to release the bonnet, Might take you a while but its near the top of the grill.
4. Attach rope to bonnet locking mechanism and attach the other end to the nearest solid object.
5. enter your landrover and put the key into the ignition.
6. start your landrover.
7. put your landrover into reverse.
8. now reverse.
9. your bonnet should be pulled slowly off your vehicle while controlling the clutch.
10. if you have followed all the guidelines in this review your bonnet should be off your landrover and on the floor waiting for you.
thank you
DK17
I'm going to do this in numbered sections.
and you will need some red and white warning barriers and some rope
1. Clear a substantial area around your landrover and mark it with barriers so no one enters the work area, for health and safety guidelines this area needs to be about 50 yards
2. stand in front of your landrover, S1/S2/S2a/S3, whichever one you have
3. locate the catch to release the bonnet, Might take you a while but its near the top of the grill.
4. Attach rope to bonnet locking mechanism and attach the other end to the nearest solid object.
5. enter your landrover and put the key into the ignition.
6. start your landrover.
7. put your landrover into reverse.
8. now reverse.
9. your bonnet should be pulled slowly off your vehicle while controlling the clutch.
10. if you have followed all the guidelines in this review your bonnet should be off your landrover and on the floor waiting for you.
thank you
DK17
