Shanec
Active Member
- Posts
- 277
- Location
- Central Scotland
possible how?
discs on rear axle 200tdi defender
- Thread starter Shanec
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
disco axle
Flossie
Well-Known Member
- Posts
- 10,949
- Location
- Shropshire
If it's a 90 yes. Not rated for a 110 though.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
if its a 110 ,then either a 300 tdi disc axle or fit those bits to your axle case ,i can give you list of parts needed ,ive converted quite a few
Last edited:
Shanec
Active Member
- Posts
- 277
- Location
- Central Scotland
Evening James
List of bits please
I have changed UJ last weekend on prop shaft end closest to rear diff, but still a clunk so hopefully just the flange going into diff needing changed, then fit the disco bits to the Defender axle.
Thanks
List of bits please
I have changed UJ last weekend on prop shaft end closest to rear diff, but still a clunk so hopefully just the flange going into diff needing changed, then fit the disco bits to the Defender axle.
Thanks
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
look at the drive members and half shafts,dont undo salisbury diff flange unless absolutely necessary
pete1987RRC
Well-Known Member
- Posts
- 5,136
- Location
- East Midlands
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
if it was a 90 use a disco axle
for a 110 etc you buy a 300 tdi defender salisbury disc axle or convert the drum axle to discs by using the 300 tdi parts
Shanec
Active Member
- Posts
- 277
- Location
- Central Scotland
Is it stupid to put a Defender 10 spline rear axle on a 110 CSW , which just so happens to have disc brakes on it?
Flossie
Well-Known Member
- Posts
- 10,949
- Location
- Shropshire
Read my post again.you still haven't said if yours is 90 or 110.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
that would be a 90 axle and drum, i can give you a list of parts for he salisbury axle
Shanec
Active Member
- Posts
- 277
- Location
- Central Scotland
Hi
It is a 110
list of parts would be appreciated
It is a 110
list of parts would be appreciated
