discs and calipers

Ok its time to get off my arse and start on my brakes. Will sign in later with results

good luck

Get a B I G breaker bar and a strong 12 point socket.

agree with above

Just got the front discs and calipers on. As far as i can see, i only have brakes on offside front and one side of caliper on front nearside, one side of caliper siezed. Surprised i got that done with 41/2 year old apprentice asking 1001 questions.All went well apart from changing brake pipe over to new caliper. Note to self, buy a proper spanner. Just got it cracked open with a good pair of pump pliers with caliper held in vice. Will change all pipes in one go to new before DOE test as sure they will fail. One thing i did notice, there was no shims behind the large circlip. there is a bit of in/out play on the axle but how much is passable? Tomorrow the rears.