Discreet Winch Mount Facelift TD5

I've been looking at the discreet winch mount from Urban Panzers site Discovery2 which I believe is this winch plate (Winch Plate for Discovery 2 - Mail Order 4X4)

Does anyone know if these also fit the facelift TD5? If so does the installation change dramatically?

Can't find any information on any site I've seen so far which distinguishes between pre facelift and facelift.

I fitted a discreet mount to my facelift. Installation was pretty much the same, except when I did mine I split the plastic from the metal on the bumper (two nuts either end, captive star bolt in the centre) which made manoeuvring the whole thing much easier as well as allowing the lower grill part to come off as a whole unit. I also attached the side plates to the chassis first, then bolted the winch to the bottom plate and deadlifted that onto the sides. Because the plates had the L shape lip, the winch was supported while I did the bolts up, and I didn't need to balance it on a jack while I bolted it to the chassis.

Thanks srtgray, id seen about fitting the side plates to the chassis first.
I'll give it a bash when funds permit a winch, assuming i don't find something else in the interim I find I want to fit!