Discovery 300tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Mmick

New Member
Posts
6
Location
Ireland
disvovery 99 300tdi has emphasized fuel pump engine turning over. But solinide not getting a key live. Ecu wont connect to scan tool. Witch is for landrover and has connected in past. I was going to rig up a key live to pump Has anyone any advice . Is there any key live in engine bay ?
 
disvovery 99 300tdi has emphasized fuel pump engine turning over. But solinide not getting a key live. Ecu wont connect to scan tool. Witch is for landrover and has connected in past. I was going to rig up a key live to pump Has anyone any advice . Is there any key live in engine bay ?
is yours an edc
 
Not sure wat u mean. Bit of a dummy lol it has 3 wires on pump

EDC is electronic diesel control on the autos.... from what you say - 3 wires - it sounds like the DDS pump on a manual... but post a piccie up, and we'll know for sure...

(From what you have said it is most likely a manual with the "normal" immobiliser problem.)
 
Not sure wat u mean. Bit of a dummy lol it has 3 wires on pump
edc is this type of pump
upload_2017-10-28_13-0-54.jpeg

manual pumps look like this
images

if your solenoid is covered with a plastic cover and has wires you can break off the cover as its secured by security bolts and use one of the 3 wires which is 12v constant ignition live straight to the uncovered solenoid
 
Ok it's the second pump has black box on back of pump with 3 workers constant live presuming 1 should become live with Key
 
Back
Top