Discovery 300tdi engine breaking, all parts available.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Brian S

Brian S

Well-Known Member
Posts
2,886
Location
Braintree, Essex
I am breaking my engine which ran well with no smoke or running issues.

Here are some prices not including p&p which usually cost about £10 on average with the courier I use. Please check with heavy items such as the head.

Cylinder head with valves, cleaned and skimmed. £150

Good turbo with broken stud for downpipe, one stud out, one ok. £75

Good turbo with good manifold. £100

Rocker shaft and rockers. £15

Vacuum pump for brakes. £15

I have the brake servo still. £15

Alternator. £60

Front cover with good bearing on the fan pully. £30

Power steering pump. £15

New power steering pump. £60

EDC injectors with good 4th injector. £150

Throttle position switch with broken bracket. £25

Auto box inhibitor switch £50. (Cost £170 new)

Injector pump EDC. £50

Sump. £20

Good block. £40

Inter cooler. £15

Newish centre box and rear exhaust (centre box a bit bashed from off roading but works great. £30

Decat downpipe (new). £15

Starter motor. £30

Fuel tank. £20

Oil cooler pipes not been on long and look new. £40 pair

Air con rad and fans. £30

Please ask if you don't see what you want from the list.

I am breaking the complete vehicle so all running gear is there.
 
Well the head and block are both still together although the rest including sump have been removed.

If you want to take the head and block then £150 as I wouldn't need to remove the head and have it skimmed and cleaned and I would rather the block was reused instead of scrapped.

The front cover is off and belt still intact and injector pump still on as well.
 
Hi
I would be interested in the diffs or maybe even the complete axles. I have an offroader only vehicle with 10 spline diffs in which have both failed.
Kev
 
Hi Both axles are available but the rear diff is weeping slightly from where the prop shaft fits.

It is the rubber doughnut version so you might want to convert it anyway. :)

Axles are in great condition though.

The truck passed an MOT shortly before it came off the road for breaking and the only advisory was a very slight bit of play in the front N/S wheel bearing, which probably just needs nipping up.

The swivels are great with no pitting and the seals don't leak and there was no clicking from the CV's

I usually sell the complete front hub assemblies excluding calipers for £50 an end, the diffs for £50 each and the axle casings for £25 each

The complete rear axle is £100

I would do the complete front axle (Excluding calipers but with very good discs) for £150

This is the ABS version but if you have not got ABS then it will work fine, just cut off the cable on the ABS sensor.
 
I'd totally forgotten about that. Sorry. :(

I will check tomorrow in my garage but I've a feeling I left it at the unit as it was so dirty. I plan to take up my trailer to bring back the dirty parts.
 
I thought I replied to this already? Stupid phone.

The lift kit is not available and the radius arms are standard.

£20 for all radius arms if you want them.
 
You must log in or register to reply here.

Similar threads

C
For Sale Freelander 2 TD4 Engine Parts
Replies
0
Views
783
CaptainB
C
bankz5152
For Sale Discovery 2 Parts Various
Replies
4
Views
2K
Firebobby1
Firebobby1
L
For Sale NEW SPARES - MAINLY SERVICE PARTS
Replies
2
Views
1K
Litch
L
L
For Sale Lots of accessories, parts and tools
Replies
1
Views
2K
Litch
L
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
438
miktdish
miktdish
Back
Top