Discovery 2 - TD5 Electrical clips (for holding connectors)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Deanod

Deanod

Member
Posts
46
Location
Cornwall, UK
Hi all,


So while fitting a new fuel filter I was removing the metal wire clip that holds the electrical connection to the fuel/wate sensor.


This pinged off with such force that bounced off my dumbfounded face and ricochet’d into the gravel I was working on. It's now totally gone and I can't find it at all. The picture below is for the airbox but the metal clip is a similar design.
Metal clip Picture.jpg


So where would I find a replacement? I don't even really know what to google. Can anyone help?


Also bonus picture, what is currently holding the clip on.
6E65B06C-E739-4B16-824E-03643B3F9E4E.jpg
 
Europa486 said:
Surely a magnet trawled through the gravel would get it found?
Click to expand...
Yep, I’ve got a magnet ‘onna stick which I dragged though the gravel for longer than I want to admit. Still couldn’t find the thing.

I would have been slightly happier if it had stuck in my forehead than losing it!
 
If the EGR is bypassed you should find something similar on the solenoid's plug which is supposed to be unused, and yes keep in mind for the future that these are supposed to be pushed not removed
 
Deanod said:
Yep, I’ve got a magnet ‘onna stick which I dragged though the gravel for longer than I want to admit. Still couldn’t find the thing.

I would have been slightly happier if it had stuck in my forehead than losing it!
Click to expand...
Gravel is a real sod.
I once lost my security wheel bolt socket. and out gravel isn't pea gravel think Chesil beach. It is over scalpings so raked it all up, sieved it as best as, etc etc.
Had to go off and buy another one.:mad::mad::mad:
Then two or three years later i was working on a vehicle close by and there the bugre was. Grinning at me.:mad:
At least I have two now:D
 
Same thing happened to mine when changing fuel filter. Searched for ages but couldn't find it so just refitted connector without clip. It stays in place fine. About 18months later my son found it on the drive so I refitted then, lol.
You might find it at a later date too.
 
sierrafery said:
If the EGR is bypassed you should find something similar on the solenoid's plug which is supposed to be unused, and yes keep in mind for the future that these are supposed to be pushed not removed
Click to expand...
No EGR Bypass yet but it's in the pipeline (this seems like a good excuse!) . I was looking at the Allisport one but I'll take suggestions if you have a recommendation?
 
AFAIK, those type of connectors are called Junior Power Timer connectors. They are cheap so you might want to buy the entire connector and just use the spring clip.
 
Second question, its holding nothing... the cable ties are on wrong if you want to use them to keep the clips in place....
 
You must log in or register to reply here.

Similar threads

Tango91
  • Poll
Disco 2 Things I wish I knew when I took the body off (99 D2 TD5)
Replies
8
Views
3K
FlatbedPilot
FlatbedPilot
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
10K
BulletBrindle
BulletBrindle
dooking for chips
New member, Disco 2 first timer
Replies
6
Views
625
dooking for chips
dooking for chips
I
Discovery 2 td5 engine help
Replies
8
Views
1K
ironhorse
I
Pluribus
Freelander 1 Inlet manifold replacement - Updated with steps and pics :)
Replies
8
Views
2K
Alibro
Alibro
Back
Top