andrewgriff
New Member
- Posts
- 3
- Location
- Walsall
has anyone ever fitted a front recovery point suitable for a RTV trial to a discovery 2, without having to replace the bumper?
Discovery 2 recovery points
- Thread starter andrewgriff
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
I haven't...and I know each disco might be different but my 2001 TD5 XS got towed up Breast High?? (I think) in the Lake District on the stock front towing eye (at my own risk, but all I have!) after the traction control took a dump and gave me the 3 amigos.
andrewgriff
New Member
- Posts
- 3
- Location
- Walsall
thank for that, i would use the stock tow eye but the RTV rules state you can not use it for trials
DIFFLOCK66
Well-Known Member
- Posts
- 3,249
- Location
- Chipping, Lancashire
... but the RTV rules state you can not use it for trials
Ah, never knew that! sorry..
trailblazer
Member
- Posts
- 89
There is a guy on the d2boys forum who make them.
andrewgriff
New Member
- Posts
- 3
- Location
- Walsall
i purchased a steering guard with recovery points on only to find it did not fit a D2 with ACE and as far as i am aware they are non avaliable to fit i dont think i can fit Jate rings as the ACE is in the way. :-(
i dont think i can fit Jate rings as the ACE is in the way. :-(
- Posts
- 14,902
- Location
- Doncaster
What about something like this
PM1170 | Mantec Steering Guard for Disco 2
... then get some steel plate, maybe 8mm thickness and fabricate your own recovery points using the steering guard attachments .. or indeed just make some coming off the bumper/chassis attachment points?
Do you know if the chassis/bumper attachment points are the same for a D1 and a D2? If so I'll have a look at chopping some plate up that suits as I have a Disco 1 available ..
PM1170 | Mantec Steering Guard for Disco 2
... then get some steel plate, maybe 8mm thickness and fabricate your own recovery points using the steering guard attachments .. or indeed just make some coming off the bumper/chassis attachment points?
Do you know if the chassis/bumper attachment points are the same for a D1 and a D2? If so I'll have a look at chopping some plate up that suits as I have a Disco 1 available ..
