Discovery 2 - favour from a d2 owner. auto shifter surround

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

resto_d1

Well-Known Member
Posts
3,661
Location
Wiltshire
Hi all

Could I ask for a favour if someone please in that they measure the plastic edge of the d2 shifter surround where it meets the centre console? Thanks!
 
This is an auto shifter surround for a D2 I believe, so the usual L & W & H and maybe the circumference ? 😊
IMG_7615.jpeg
 
Sorry it didn’t notify me of responses. Just length and width at widest points of please. Even better if of the trim itself. I have the walnut window switches but the d1 full wood centre console trim is hens teeth - not sure if it was yank only. I want to see how much out the shifter is on the d2 one. If it’s not miles out, I’ll be able to use without a re-veneer but if it’s a way out I’d have to modify and re-veneer
 
If you want it that bad why not just buy a piece of walnut veneered timber, maybe even MDF veneered and cut it to size?
I got a walnut veneered dashboard blank for a kit car and then cut it and shaped it to fit the instruments and switches I had obtained then shaped it to take the steering wheel column and the interior so it was mostly curves. For a 1930s SS jaguar lookalike. Funnily the originals had painted metal!
 
Done that for some bits mate, just don’t trust myself getting the right curve which is why worst comes to worst I’d use a d2 one, add/remove material then veneer over the top.
 
Stanleysteamer said:
If you want it that bad why not just buy a piece of walnut veneered timber, maybe even MDF veneered and cut it to size?
I got a walnut veneered dashboard blank for a kit car and then cut it and shaped it to fit the instruments and switches I had obtained then shaped it to take the steering wheel column and the interior so it was mostly curves. For a 1930s SS jaguar lookalike. Funnily the originals had painted metal!
Click to expand...
This is as far as I’ve got - all these bits have had to have fresh walnut burl.
I know it’s an acquired taste but I love wood trim in an older car!!
IMG_5556.png
 
resto_d1 said:
This is as far as I’ve got - all these bits have had to have fresh walnut burl.
I know it’s an acquired taste but I love wood trim in an older car!!
View attachment 327784
Click to expand...
Me too, I do kit cars that look like 1930s cars and they all have wooden dash's, door caps, gearlever knobs etc. They can be a lot of work though and maintenance is something lots of peeps couldn't be bothered with.
 
Stanleysteamer said:
Me too, I do kit cars that look like 1930s cars and they all have wooden dash's, door caps, gearlever knobs etc. They can be a lot of work though and maintenance is something lots of peeps couldn't be bothered with.
Click to expand...
I’m fond of it in German 80s/90s barges too. Fully specced out 5 and 7 series with the walnut trim looks the nuts imo but a lot of people hate it.
 
You must log in or register to reply here.

Similar threads

J
Discovery 1 steering box in discovery 2
Replies
4
Views
201
Anaconda
A
Becks Bear
*****help parts required*****
2
Replies
20
Views
1K
Firebobby1
Firebobby1
A
Discovery 2 Part Identification Request
Replies
9
Views
740
Badger688
Badger688
Stanleysteamer
Disco 2 wipers seem to have jumped a cog.
2
Replies
21
Views
1K
Stanleysteamer
Stanleysteamer
Sieklo
Disco 2 D2 TD5 Auto high fuel consumption
Replies
8
Views
485
sierrafery
sierrafery
Back
Top