discovery 1 to 2 rear conversion

Dicovery maniac · Jan 21, 2012

hey everyone, i have a discovery 300 tdi mk 1 with the old austin maestro van rear lights, what i am wanting to do is take the rear cornors of a pre face lift discovery 2 td5/v8 and put them on mine with the lights. was just wondering if anyone has tried this at all and know what work is involved for example are the mountings the same, same size etc.
Ceers Steve

disco2shaun · Jan 21, 2012

There's 1 that lives near me, disco1 with disco2 read end. Looks good

Dicovery maniac · Jan 21, 2012

awww man i wanna see it now lol dont live far from donny lol, well me and my neighbour were in his kitchen and we got on the idea coz my rear on mine is so ugly its unbelievable and disco two rear ends are so nice i so wanna do it be very few aswell but at least i no its possible

Mr Noisy · Jan 21, 2012

Dicovery maniac said:
(disco 1) rear on mine is so ugly its unbelievable

how dare you?!?!

I think it's aged very well!

Dicovery maniac · Jan 22, 2012

haha come on mr noisy its just out of the rover parts bin and u have the v8 disco with the sub and gas stove in back arnt you?

Mr Noisy · Jan 22, 2012

Dicovery maniac said:
haha come on mr noisy its just out of the rover parts bin and u have the v8 disco with the sub and gas stove in back arnt you?

The whole car was parts bin

If I'm honest though I think the rear end is more appealing than the front. They need a lift and big tyres to look really good though.

ANYWAY yes it's me mate, hello! :5bseeya:

sidewaysste · Jan 22, 2012

I used to prefer the 200 front. I thought the 300 front was an abortion and actually wanted to write to landrover to ask them to change it back when I first saw one on the cover of Autocar. (I was 10)
Now I prefer the 300 front end.

I used to think the transit front was the same as the 200 Disco front... see previous comment about age...

Maybe we should start a thread of guess the parts bin addition, eg

Maestro van rear lights
Sherpa front light
Rangerover doors
etc

Mr Noisy · Jan 22, 2012

You're right, old transit very similar!

Urm, wiper stalks from austin metro on 200!

Dicovery maniac · Jan 22, 2012

haha byw i was the guy dropping the bacon everywhere the other week lol and it is quite bad the discovery is a good all round vehicle but it just has some design faults i replaced the indicators with clear ones and put td5 headlights in it to spice it up a bit

Mr Noisy · Jan 22, 2012

Dicovery maniac said:
haha byw i was the guy dropping the bacon everywhere the other week lol and it is quite bad the discovery is a good all round vehicle but it just has some design faults i replaced the indicators with clear ones and put td5 headlights in it to spice it up a bit

Oh hi mate, urm, Steve?! (hopefully!)

Anyway nice one, its all about modifying bits and pieces to get it to your liking. Great thing about td5 headlamps is that they actually work

sidewaysste · Jan 22, 2012

are they any better than 300 tdi lights?

Mr Noisy · Jan 22, 2012

sidewaysste said:
are they any better than 300 tdi lights?

They have black surround, but can't be any worse cos they're newer!

mrnice · Jan 22, 2012

I have no proof of this but the general consensus is they are quite a bit better and a straight fit.

matty_daak · Jan 22, 2012

door handles are off an austin princess... but I love em!

I have no proof of this but the general consensus is they are quite a bit better and a straight fit.

- anything will fit... its just a matter of time and effort!

After all, we've already covered the fact that land rover made the whole vehicle from spare parts!! lol

Dicovery maniac · Jan 23, 2012

yeh its steve mister noisey and it is all about preference and i have td5 front headlamps there the same in light emitting but the light is about a 1cm shorter on the botttom so they dont quite fully fit leaving gaps at bottom but nothing too noticable, i have a second discovery that im looking at taking the rear pillars off atm but i started taking side panel off and not pillar i no they are welded on with td5 but i can get around that but are they on the 300tdi

Mr Noisy · Jan 23, 2012

Disco 1 corner panels are spot welded to quarter panel but screwed/glued to inner body in the door jam. They will wiggle off the quarters without much trouble, but they won't go back on without a fight so don't change your mind half way through!

Dicovery maniac · Jan 23, 2012

is it possible to rivet these back on??

Mr Noisy · Jan 24, 2012

Yeah but it's awkward!

Dicovery maniac · Jan 24, 2012

hmmm see id rather not weld them cause i cnt afford even thought two of my brothers are welders lol so its either rivet or nut and bolt, plus id rather do it all while the side panel is on the car as i have a 3 door and its too big to mess about with

discovery 1 to 2 rear conversion

Dicovery maniac

New Member

disco2shaun

New Member

Dicovery maniac

New Member

Mr Noisy

Coming in your ears.

Dicovery maniac

New Member

Mr Noisy

Coming in your ears.

sidewaysste

Active Member

Mr Noisy

Coming in your ears.

Dicovery maniac

New Member

Mr Noisy

Coming in your ears.

sidewaysste

Active Member

Mr Noisy

Coming in your ears.

mrnice

Loading.....

matty_daak

Active Member

Dicovery maniac

New Member

Mr Noisy

Coming in your ears.

Dicovery maniac

New Member

Mr Noisy

Coming in your ears.

Dicovery maniac

New Member

Similar threads