Discovery 1 3 Door Build Tread

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DiscoLyle

DiscoLyle

Member
Posts
84
Location
Cumbria
Good evening
I am now the proud owner off a 1995 3 door manual discovery 1.
I have never had a landrover before but always really fancied one, so bit i the bullet and bought this for £2000. I don't know if that's a good price, I just really liked it. It's done 96k miles and the chassis is in very good condition.

Bad point's
A small area of rust in the rear passenger side arch.
Inner wings are a little bit tatty under the bonnet where they meet the bulkhead.
Boot catches on the rear bumper and needs to be lifted to shut properly.
Since getting it home I've give it a good clean. Previous to this I had a 03 suzuki jimny
[GALLERY=][/GALLERY]
 

Attachments

  • 20191011_192513.jpg
    20191011_192513.jpg
    271.5 KB · Views: 320
  • 20191011_192513.jpg
    20191011_192513.jpg
    271.5 KB · Views: 257
Very nice.

I have a 3 door Discovery also, a 200Tdi from 1992.

Your back door catching the bumper will be your needing new door hinges, easy job if you have two people, little more difficult but not impossible on your own.

If you have any rot then get it cut out and weld new new steel in as fast as possible.

Be warned, what you see now is nothing compared to what is lurking underneath!!!

I recommend a full waxoyling from top to bottom and done annually.

Petrol or diesel?
 
Diesel. I know the pain iv had a classic mini before starting to poke a small hole soon ends up a chasm haha.
dieseldog69 said:
Very nice.

I have a 3 door Discovery also, a 200Tdi from 1992.

Your back door catching the bumper will be your needing new door hinges, easy job if you have two people, little more difficult but not impossible on your own.

If you have any rot then get it cut out and weld new new steel in as fast as possible.

Be warned, what you see now is nothing compared to what is lurking underneath!!!

I recommend a full waxoyling from top to bottom and done annually.

Petrol or diesel?
Click to expand...
 
kevstar said:
I have a 3 door disco in my fleet what's the plans for yours bud ;)
Click to expand...
I will be using it as a second car and to cart my fishing stuff around. I want to get it back to a good standard and eventually add a few light off road mods. I might do a few pay and play days but stick to the mild trails. I don't have the technical knowledge to be breaking mechanical parts haha . I'm a welder by trade.
 
Last edited:
DiscoLyle said:
I will be using it as a second car and to cart my fishing stuff around. I want to get it back to a good standard and evently add a few light off road mods. I might do a few pay and play days but stick to the non mild trails. I don't have the technical knowledge to be breaking mechanical parts. I'm a welder by trade.
Click to expand...

Welders & land rover are a match made lol
Ive got a complete spare disco breaking with a load off new parts on it, steel bumpers,snorkel,lift kit,rear ladder ect ect
if your needing any bits give me a shout I might have it, got another scrapper that will be weighed in soon ;)
 
kevstar said:
Welders & land rover are a match made lol
Ive got a complete spare disco breaking with a load off new parts on it, steel bumpers,snorkel,lift kit,rear ladder ect ect
if your needing any bits give me a shout I might have it, got another scrapper that will be weighed in soon ;)
Click to expand...
I will give you a shout if I need anything mate where you base?
 
In the first post i said i had a small area of rust in the rear arch. That turned into replacing most of the rear quarters and patching in the floor. I have also replaced the sills with box section. Im going to spray the interior when I get a nice day with upol gravitex. This will give a durable finish as well as having sound deadening properties.
 

Attachments

  • 20200722_072949.jpg
    20200722_072949.jpg
    449.1 KB · Views: 147
DiscoLyle said:
In the first post i said i had a small area of rust in the rear arch. That turned into replacing most of the rear quarters and patching in the floor. I have also replaced the sills with box section. Im going to spray the interior when I get a nice day with upol gravitex. This will give a durable finish as well as having sound deadening properties.
Click to expand...
Lovely job you’ve done there! Mine looks like a patchwork quilt lol
 
What! A welder and can read and write :eek:

:p:p

looks great so far buddy. Keep those updates coming. One of my neighbours has a three door on durdy great balloon tyres and a Union Jack roof. Looks brill but I wouldn’t like to drive it far without a sick bag handy.
 
Bobsticle said:
What! A welder and can read and write :eek:

:p:p

looks great so far buddy. Keep those updates coming. One of my neighbours has a three door on durdy great balloon tyres and a Union Jack roof. Looks brill but I wouldn’t like to drive it far without a sick bag handy.
Click to expand...
 
You can speak to your phone and it comes out as text nowadays. Its been a god send for all the welders ;)

Its a big change from proper structural welding when everything has to be prefect. Sometimes the welds are inspected for cracks and defects using MPI, dye pen, Xray or ultrasonic.

I would take that, over welding cars any day ! Nice clean thick steel.
"I like big butt's and I can not lie"

I Honestly think it would be quicker to learn to weld cars if you have no preconceived experience
from welding anything else. When you go from really thick steel to thin dirty stuff its hard not to blow holes haha
 
You must log in or register to reply here.

Similar threads

L
Rear heated switch( panel land rover discovery 3)
Replies
5
Views
450
LR-hobbs
L
MAF Diver
Disco 2 Nanocom/RAVE manual is wrong: adjusting windows after removing key and opening a door?
Replies
4
Views
424
MAF Diver
MAF Diver
J
Disco 4 (LR4) Discovery 4 issues
Replies
0
Views
196
Jed Trousers
J
F
New Discovery 1 project from France
2
Replies
21
Views
2K
FrenchyDisco
F
Philgt50
Rear brakes TD4
2
Replies
26
Views
887
Philgt50
Philgt50
Back
Top