Disco2 cruise control

Hi,

For unknown reason, the previous owner of my D2, change the ecu from manual to automatic (my car have manual gearbox).
I've retrofit the cruise control but it doesn't work...
From what i could learnt so far, there is some change required in order to make it work since the clutch sensor is not required for an automatic ecu..
Any hints?
I checked already with nanocom and the signal of CC, set and reset switch's are working properly and brake switch is also ok.

Hi, better get a proper manual ECU and sell your's cos botched up auto ECUs dont work well on manuals even if it seems so, the engine management is on a kind of default mode to override the surge damping... the auto ECU needs invasive intervention made by somebody who knows exactly how to build in the clutch switch's circuit and even then there are fuel map "restrictions". It's not something to keep on a long run believe me.