discool
Well-Known Member
- Posts
- 13,621
It will be shown in Microcat, I believe that's the exact digital copy of a LR parts catalogue.
Disco1 foglights
- Thread starter mrnice
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,621
Yes u can from the same places as Rave (green oval) I have down-loaded it but haven't installed it yet as I see there is a dill file and with my bad experance with these files is that you can't remove them if there is a problem.
So at the moment it's a parts book. Then hundreds have installed Microcat with out any problems it's very clear and better than the book.
BenjyP
New Member
- Posts
- 186
- Location
- Shropshire
So, whats the out come??
I have a 97 300tdi and im looking at fitting a roof bar with lights and hopefully to connect op to the fog lights circuit....
Is the swithc wiring under the clock?
Do i need additional relays??
I know there is probably a million threads on roof light wiring but its all to vague.... i wanna keep it looking factory on the dash.
I have a 97 300tdi and im looking at fitting a roof bar with lights and hopefully to connect op to the fog lights circuit....
Is the swithc wiring under the clock?
Do i need additional relays??
I know there is probably a million threads on roof light wiring but its all to vague.... i wanna keep it looking factory on the dash.
306 sam
New Member
- Posts
- 214
- Location
- Bletchingdon (OX5)
any update on this? i'm trying to do the same as post #44 and i've taken the dial cluster out and the part of the dash where the radio is and checked all the connectors under the drivers side of the dash ;/ if not does anyone have the wireing guide/pin guide for the front fog switch? then i can make my own addition to the loom
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Carling switches have the same pin outs as LR switches. D4x4 have all the pinouts on their forum.
Similar threads
