Disco front brake caliper

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

Shiner63

New Member
Posts
15
Hi guys, I have just changed the drivers side brake disc and pads on my 3.9 '96 disco, but on doing the passenger side; I cannot remove the bottom calliper securing bolt, it looks like some one has previously had a go at this as the bolt head is quite chewed up and the socket just slips off.
any ideas on how to remove this bolt please?
 
Hi

I did my wife's car last weekend and would not have managed if I had of a set of hex sockets they should get it off without any damage.


Dieseler
 
Shiner63 said:
thank you for the replies guys, but I've already tried those two options. any other ideas please?
Click to expand...

mushrooming head then hammering 1/2 inch bihex socket is the best way ,when socket slips again hammer some more and retry ,dont go too far with mushrooming so that socket cant be hammered on it will work eventually ,hammering will loosen bolt
 
If the head has already been rounded I think that there is a great chance of the extractor working ... It did on mine!

Twas just a suggestion, you understand :D
 
You must log in or register to reply here.

Similar threads

G
Defender 110 brake callipers
Replies
5
Views
449
Groaning Hippo
G
damian46
Brake pads not fitting
Replies
13
Views
1K
damian46
damian46
Rusty Bucket
Modify front brake hose bracket
Replies
3
Views
372
v8250
v8250
dag019
Brake caliper rebuild
Replies
3
Views
776
Seaswood
Seaswood
L
Hand brake question
Replies
14
Views
1K
romanrob
R
Back
Top