I am pretty sure the software is changed when AMK is fitted.
@gstuart would probably know.
send it back for an exchange
perhaps @blue beasty will move this thread to proper place too.
j
Thank you , yes The car kept dropping and lifting at random moments followed by the “Suspension Fault” warning on the dash . It would do it regularly and then reset. I was waiting for the total failure , as I had with my previous RR Vogue SE which turned out in that case to be a torn bag front near side . With the D3 I’ve ended up with the compressor running on start up very noisily for approx 30 seconds, no lift and the Suspension Failure warning . I’ve taken the awful noise to mean the compressor has had enough. I wasn’t aware of the practice of upgrading to D4 compressors so didn’t think to check which one was under there . I’ve got the repair kit which is required if you have to cut existing pipes but I’m now wondering about the software differences ?
you owe somebody cake should you ever meet him
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
