Disco 2 dog guard

Wullie Simpson · Feb 22, 2019

Morning,

has anyone out there got a dog guard fitting kit, or even bits of it, lying around going abegging?
I have a britpart half guard that I got from a gut, but no fitting kit and it turns out the fitting kit is now obsolete with no superseding part, even though they are still selling the guard?
I have contacted Britpart and they have said it will take a long time to get a kit from china. A LONG TIME....

Can anyone help??

cheers Wullie....

Si Click · Feb 22, 2019

Do you mean Part No STC50323? If so there are lot of sellers on EBay who offer it with a fitting kit. Contact one of them.

landowner · Feb 22, 2019

If it's like mine its only a couple of little brackets at the bottom, top clips into grab handles

beanwood · Feb 22, 2019

If you find a supplier please let us all know. I’ve been looking for one for a while now. The top bracket is what I’m particularly after, as I’m confident of making a half tidy bottom bracket from some aluminium channel.
Perhaps this is one for someone with a 3D printer

Wullie Simpson · Feb 22, 2019

Yeah, thats the one and the fitting kit is STC50231, I've been trying to get that on its own and its seems impossible.
Thats what I dont get, folk are happy to sell the two together, but you cant get the fitting kit on its own , need to order from China.
Was hoping someone had some bits kicking about in a wagon or a garage that they were not using.....

As Beanwood says, the bottom bracket would be ok, you could fab it up, but the top one, you need to cut a bit off the grab handle and then bolt a new bit in....
Not like the P38 where you used riv nuts.

I dont want to revert to the cable tie solution, my Mrs would go radio rental......again......

beanwood · Feb 22, 2019

Wullie Simpson said:
I have contacted Britpart and they have said it will take a long time to get a kit from china. A LONG TIME....

Hi @wullie

TBH if I could get one in say 6 weeks from China, I'd be OK with that. I just don't fancy hacking together something (Which I know would be less than great) as a permanent solution.
Did they actually suggest ordering was an option?

Wullie Simpson · Feb 23, 2019

beanwood said:
Hi @wullie

TBH if I could get one in say 6 weeks from China, I'd be OK with that. I just don't fancy hacking together something (Which I know would be less than great) as a permanent solution.
Did they actually suggest ordering was an option?

Hi Beanwood,

yeah they did, I will contact them again and see what they say.......they have not come back yet with a delivery time or a price.....

janderson41 · Feb 23, 2019

Hello Wullie. ,
Have you tried Kevin at Bankhead ind estate in Glenrothes.
He only breaks Disco 2's.
Might have a used set.
Tel no 07969 961385.
I,be got parts from and find him helpful
Worth a call

Wullie Simpson · Feb 24, 2019

janderson41 said:
Hello Wullie. ,
Have you tried Kevin at Bankhead ind estate in Glenrothes.
He only breaks Disco 2's.
Might have a used set.
Tel no 07969 961385.
I,be got parts from and find him helpful
Worth a call

Cheers Jim, I will give him a call on Monday, much appreciated, good info, even for other bits!!

beanwood · Feb 24, 2019

Wullie Simpson said:
Cheers Jim, I will give him a call on Monday, much appreciated, good info, even for other bits!!

@Wulli Simpson - you get first dibs on this, as it's your thread, but if he has two sets available, can you let me know please

Wullie Simpson · Mar 7, 2019

janderson41 said:
Hello Wullie. ,
Have you tried Kevin at Bankhead ind estate in Glenrothes.
He only breaks Disco 2's.
Might have a used set.
Tel no 07969 961385.
I,be got parts from and find him helpful
Worth a call

Cheers for that, got bits from Kevin, he seems to know his stuff about Disco 2's, he has plenty about the place! Thanks again!!

Stanleysteamer · Mar 27, 2019

Hi
I think I may have a brand new one. Ordered a dog guard for my Disco 2 which had the fitting bits but not the guard, hence why I have the bits. Tomorrow I will take a photo of it and if you pm me I can send the pics to you so you can see if it is what you need. Price will just be postage.
Cheers

Stanleysteamer · Apr 7, 2019

beanwood said:
If you find a supplier please let us all know. I’ve been looking for one for a while now. The top bracket is what I’m particularly after, as I’m confident of making a half tidy bottom bracket from some aluminium channel.
Perhaps this is one for someone with a 3D printer

Bit old this now, but are you still looking for top brackets, and the bottom bits, I still have stuff that Wullie no longer seems to need?

Stanleysteamer · Apr 7, 2019

PS, my top bracket is separate to the grab handle and is attached behind it. PM me if you want photos.

beanwood · Apr 7, 2019

Stanleysteamer said:
Bit old this now, but are you still looking for top brackets, and the bottom bits, I still have stuff that Wullie no longer seems to need?

Thanks @Stanleysteamer - but I have managed to get a set from Heathy on the D2 forum.

Stanleysteamer · Apr 7, 2019

beanwood said:
Thanks @Stanleysteamer - but I have managed to get a set from Heathy on the D2 forum.

glad you have got what you needed!

Si Click · May 13, 2019

Stanleysteamer said:
Hi
I think I may have a brand new one. Ordered a dog guard for my Disco 2 which had the fitting bits but not the guard, hence why I have the bits. Tomorrow I will take a photo of it and if you pm me I can send the pics to you so you can see if it is what you need. Price will just be postage.
Cheers

Do you still have them? I have given up trying to source a full luggage barrier and am going to go with a STC50082AA dog guard. I've found a decent used one, but it does not come with the bits.

Disco 2 dog guard

Wullie Simpson

Member

Si Click

Well-Known Member

landowner

Pensioner Pete

beanwood

Active Member

Wullie Simpson

Member

beanwood

Active Member

Wullie Simpson

Member

janderson41

Active Member

Wullie Simpson

Member

beanwood

Active Member

Wullie Simpson

Member

Stanleysteamer

Well-Known Member

Stanleysteamer

Well-Known Member

Stanleysteamer

Well-Known Member

beanwood

Active Member

Stanleysteamer

Well-Known Member

Si Click

Well-Known Member

Similar threads