sierrafery
Well-Known Member
- Posts
- 17,871
- Location
- Arad/Romania
In the PDF owner's handbook 2002 publication LRL 0545ENG it's in the "Driving and operating" chapter at the "transfer gearbox" -
Disco 2 cdl
- Thread starter Henry.adams
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Henry.adams
Active Member
- Posts
- 123
- Location
- Kent uk
So a may 01 is unlikely to have the cdl bolt on the transfer box ?
- Posts
- 2,061
- Location
- Hertfordshire
Is that the date of registration ? As it could depend on when it was built @sierrafery says all up to & inc. MY2000 & @Pawl says at least to March 01. The only way to check for sure is to see if at the very least it has that 6mm thread sticking out the the top of the TB, see link.
Genuine Front Ouput Shaft For Land Rover Discovery 2 1998 - 2004 Classic | Jaguar Land Rover Classic Parts
Henry.adams
Active Member
- Posts
- 123
- Location
- Kent uk
That’s when it’s registered yeah
- Posts
- 2,061
- Location
- Hertfordshire
This link implies if the TB starts with 41D or 42D it should have the internals (mine starts 41D & was reg Sept 2001)
DA1178 - Disco 2 Diff Lock Lever Kit for 41D and 42D Transfer Boxes (johncraddockltd.co.uk)
DA1178 - Disco 2 Diff Lock Lever Kit for 41D and 42D Transfer Boxes (johncraddockltd.co.uk)
Henry.adams
Active Member
- Posts
- 123
- Location
- Kent uk
Well I’m Going to see this one tomorrow fingers crossed it has a cdl transfer case
JUKE179r
Well-Known Member
- Posts
- 3,166
- Location
- Suffolkshire
Best known as the "nipple".
Si Click
Well-Known Member
- Posts
- 1,506
- Location
- Lincolnshire
I can see the CDL inclusion in the Owners Handbook for the 03 model, which makes sense as it was an option for the later models. But I can see nothing in the handbooks for earlier models. Not sure why this would be if it was an option for 99-01 models.
Similar threads
