Disco 2 Bull Bars

Landshandy · Apr 20, 2015

What's everyone got, anyone recommend?

ArticFox · Apr 21, 2015

I put a genuine LR one on my early Disco 2 - but I did have a facelift front bumper on already.

HTH

Landshandy · Apr 25, 2015

Will disco 1 wrap around nudge bars fit in a 2002 facelift?

http://pages.ebay.com/link/?nav=item.view&alt=web&id=201337604782

Dr LC8 · Apr 25, 2015

Hi,

As I am seeing your car here below, was it on standard suspension or higher?

Thanks

Nic

ArticFox said:
HTH

Landshandy · Apr 30, 2015

Landshandy said:
Will disco 1 wrap around nudge bars fit in a 2002 facelift?

http://pages.ebay.com/link/?nav=item.view&alt=web&id=201337604782

Anyone help?

ArticFox · Apr 30, 2015

It had +2" OME suspension and 265/76x16 BFG AT tyres, so it had presence

robhew86 · Apr 30, 2015

Landshandy said:
Anyone help?

No a D1 bull bar won't fit on a D2 without serious modification. It Attaches onto the chassis differently IIRC as the Chassis's are different.

HTH

TrilloThrillo110 · Apr 30, 2015

Have a look at RTE. They have a very nice range of expensive but incredibly strong bumpers and also full width bull bars.

ArticFox · May 1, 2015

robhew86 said:
No a D1 bull bar won't fit on a D2 without serious modification. It Attaches onto the chassis differently IIRC as the Chassis's are different.

HTH

I tried putting a D1 bullbar onto my D2 a while back. The chassis rails are the same distance apart, that isn't the issue. The problem is that the D1 bumpers sit around 2-3 inches lower than D2 bumpers, so you'll need to fit some plates to adjust the height accordingly. Also, the length of the wing from the front to the wheel arch is longer on a D1 - I had to trim a couple of inches off the D1 bumper to match the D2 arches.

So its a pretty straightforward job, but you'll need to make some mounts to get the height correct. I used some 6mm plate, 2 plates over each chassis rail, then put some 4mm wall tubing between the plates to stop them from being distorted when the bolts are tightened up. In the end I chucked it all away as it still didn't look right to my eye - and I bought the facelift D2 bumper and bullbar instead.

Landshandy · Sep 20, 2015

Cool, will look into that. I saw a chap with an ARB bull bar he installed on this a few months ago but I've been told full wrap bars are illegal now????

Landshandy · Sep 28, 2015

Are wrap around illegal?

steveyorks · Sep 29, 2015

Not sure about the legality but I think some insurance companies will refuse to cover you. The rest will just pull down your pants and spank you for extra money.

Jamiegreen · Oct 21, 2018

Hmm I know this is an old thread and all but the site seems to be having some problems making a new thread.
Me question is, I found these real nice looking bull bars whilst browsing, and have no idea if they will fit a facelift d2 2003. I have only ever seen them fitted to non facelift. Do those brackets go right up under the bumper onto the chassis or through the front of the bumper?
Would very much like em.
https://www.gumtree.com/p/car-part-accessories/land-rover-discovery-2-bull-bars/1316716658

Disco 2 Bull Bars

Landshandy

Active Member

ArticFox

New Member

Landshandy

Active Member

Dr LC8

Member

Landshandy

Active Member

ArticFox

New Member

robhew86

Well-Known Member

TrilloThrillo110

Active Member

ArticFox

New Member

Landshandy

Active Member

Landshandy

Active Member

steveyorks

Well-Known Member

Jamiegreen

Well-Known Member

Similar threads