RobRainford
New Member
- Posts
- 412
- Location
- St Helens
Is a roller door possible on the back of a disco? Looking at it it's probably possible. But would require a fair bit of getting. Would look smart methinks.
Disco 1 rear roller door
- Thread starter RobRainford
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
easye1
Banned
- Posts
- 8,557
methinks it can be done!
thinking back to real post office days they used sherpa vans with roller shutter doors fitted sometimes,
all it was, was the runners for the roller shutters were fabricated into the rear door opening just inside the back.
If I can remember, the roller mechanism had the roller storage box at the top that was just proud of the rear roof line.
But It would need a sealed bulkhead between you and the doors coz of fumes being sucked in.
it would make you sleeeepy before you just died!
thinking back to real post office days they used sherpa vans with roller shutter doors fitted sometimes,
all it was, was the runners for the roller shutters were fabricated into the rear door opening just inside the back.
If I can remember, the roller mechanism had the roller storage box at the top that was just proud of the rear roof line.
But It would need a sealed bulkhead between you and the doors coz of fumes being sucked in.
it would make you sleeeepy before you just died!
Clyde.
Member
- Posts
- 50
- Location
- The Tripe Mines
It'll have a right lump in it if you forget to take the spare wheel off before you open it!
The Ferkin BoB
Banned
- Posts
- 3,703
- Location
- on a ferkin footpath......
lol...get a defender and be done...
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
oh and look ****e
+1 :d
Similar threads
