Discomil
New Member
- Posts
- 1
- Location
- Westmidlands
Hi everyone new to the forum and new to landrovers I purchased a 300tdi disco 1 a month or so ago that had been stood a couple years done a load of work on it to get it road worthy and mot’d again.
one of the things were diff lock wasn’t engaging i managed to free off the lincage and thought that was that simple fix.
I went out one evening last week and ended up getting stuck both axles beached i was in low range diff lock but only 1 rear and the opposite front was spinning i then noticed the diff lock light had gone out i then pushed across to the left and held it there and diff lock engaged and seemed to be working only if i held the stick across to the left when putting power on and spinning it did not sound healthy at all asif it was skipping and clonking and shreading gears i eventually got out doing it this way as it was my only choice but its definitely not right and would like to get it sorted any ideas ? Thanks
one of the things were diff lock wasn’t engaging i managed to free off the lincage and thought that was that simple fix.
I went out one evening last week and ended up getting stuck both axles beached i was in low range diff lock but only 1 rear and the opposite front was spinning i then noticed the diff lock light had gone out i then pushed across to the left and held it there and diff lock engaged and seemed to be working only if i held the stick across to the left when putting power on and spinning it did not sound healthy at all asif it was skipping and clonking and shreading gears i eventually got out doing it this way as it was my only choice but its definitely not right and would like to get it sorted any ideas ? Thanks
