- Posts
- 10,639
- Location
- Oxfordshire
my 300 (though in a fender) rad has no fins left! it doesn't overheat though..
Duff viscous fan?
rad caps a good point she was blowing out water through the cap when she boiled but normally cap cam be removed without so much as a hiss. Rad I can't really get my hand in to feel properly but it's definitely not hot all over. Stat is definitely opening can feel coolant flowing in top hose
LOL, maybe the Daf on the trailer improved the aerodynamics ..
Bahhh Email,Also txtd Er1C & Yellow90 :faint2:
Hopefully my overheating problem is now sorted. Brand new rad in place, new thermostat, given the engine a full service, new rad cap, replaced the plastic bungs with brass ones, and I have a new waterpump that would have gone on if I could have got the pulley bolts to undo. Got to get some irwin rounded bolt removers to change water pump. To be honest I don't think she really needs a new waterpump as there was good waterflow and no roughness in the bearings. I'll will change it in due course though as I have a brand new genuine part here ready to go on.
Incidently my old radiator was well past its best. Front side had next to no fins left and the rear side all the fins turned to dust and fell out when I lifted it out so having a new radiator has got to help things.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!