Difficult removing roof bar

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
MGRmanic

MGRmanic

Member
Posts
47
Location
Cheltenham
I've managed to remove the offside roof bar on my P38.
The nearside one is proving difficult. 2 of the 3 heads of the bolts have stripped smooth and therefore can't remove the plate to access the rest of the holding clamps.
I've got frustrated and drilled the heads but I'm fast thinking this will do nothing to help me.
Charles at cn4x4 suggested trying to wiggle the bar and use a pry bar to lever it off. I'm thinking this will cause damage to my roof.
My other idea is to put an angle grinder to the plate either side to expose the holding clamps.
I lose only 2 plates in the process.
Suggestions welcome.
 
MGRmanic said:
I've managed to remove the offside roof bar on my P38.
The nearside one is proving difficult. 2 of the 3 heads of the bolts have stripped smooth and therefore can't remove the plate to access the rest of the holding clamps.
I've got frustrated and drilled the heads but I'm fast thinking this will do nothing to help me.
Charles at cn4x4 suggested trying to wiggle the bar and use a pry bar to lever it off. I'm thinking this will cause damage to my roof.
My other idea is to put an angle grinder to the plate either side to expose the holding clamps.
I lose only 2 plates in the process.
Suggestions welcome.
Click to expand...

Pictures needed to see what you've done & whats going on.
 
MGRmanic said:
I've managed to remove the offside roof bar on my P38.
The nearside one is proving difficult. 2 of the 3 heads of the bolts have stripped smooth and therefore can't remove the plate to access the rest of the holding clamps.
I've got frustrated and drilled the heads but I'm fast thinking this will do nothing to help me.
Charles at cn4x4 suggested trying to wiggle the bar and use a pry bar to lever it off. I'm thinking this will cause damage to my roof.
My other idea is to put an angle grinder to the plate either side to expose the holding clamps.
I lose only 2 plates in the process.
Suggestions welcome.
Click to expand...

A pry-bar sounds drastic, even with some leather or folded cloth underneath to prevent scratches.

Never had roof bars but I assume they clamp on somehow?
 
Apologies for lack of reply. I've been away working. I will upload some pictures to show a clearer explanation.
The RR gets 4 new air bags fitted tomorrow so maybe the fitter will see a way round the problem up top???
 
The pictures of the roof bar.
RR Pic1.jpg
RR Pic 2.jpg
 

Attachments

  • RR Pic 3.jpg
    RR Pic 3.jpg
    106.4 KB · Views: 130
RR Pic 4.jpg

I've been drilling but realised that the bolt goes right through to the plate on the other side of the roof bar. To get to the clamps holding the bar onto the roof you must remove the plate. The only solution I can see is to put an angle grinder to the plate and then undo the clamps.
 
You must log in or register to reply here.

Similar threads

C
Defender 90 TD5 Roof Load.
Replies
5
Views
845
casey66
C
ChrisBduck
3.6L Land rover 90
Replies
2
Views
1K
ChrisBduck
ChrisBduck
Hammer'n'tongs
Tyres wearing unevenly:- Axle ends out of alignment
Replies
9
Views
1K
Hammer'n'tongs
Hammer'n'tongs
Matt2000
Geoff the 2002 Freelander
Replies
5
Views
1K
Matt2000
Matt2000
R
Roof Bar Seals
Replies
6
Views
838
ronsealdeath
ronsealdeath
Back
Top