khaos
New Member
- Posts
- 2,907
- Location
- Sheffield, South Yorkshire.
It still amazes me that the linkage that engages diff lock is basically a paperclip straightened out. I'd have put money on it breaking.
Diff Lock Not Engaging
- Thread starter Stuballsed
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bromsgrove Defender
Well-Known Member
- Posts
- 5,759
- Location
- Out to lunch
If anyone is interested. The solution was to replace and properly adjust the diff lock switch on the top of the tranny. So, yes an old, faulty, missadjusted diff lock switch can foul the mechanism. Works a treat now
(Thread resurected in the hope of helping someone searching this in future).
Piccy's would have been good
:nopics: 
I gave someone a right ragging cos he thought he could adjust his diff lock.
Never occured to me that the diff lock switch on top of the tranny might be adjustable. :doh:
Andy Land
Well-Known Member
- Posts
- 4,499
- Location
- ... en route to Cuckoosville.
Piccy's would have been good
I gave someone a right shagging cos he thought he could adjust his diff lock.
:doh:
Edited for accuracy
Bromsgrove Defender
Well-Known Member
- Posts
- 5,759
- Location
- Out to lunch
Stuballsed
New Member
- Posts
- 1,093
- Location
- Oxfordshire
Don't forget you can also adjust the amount of movement/throw on the difflock lever on the top of the tranny box by adjusting the lenght of the pivot point on the pivot arm.
Seaswood
Active Member
- Posts
- 232
- Location
- Falmouth New England
Don't forget you can also adjust the amount of movement/throw on the difflock lever on the top of the tranny box by adjusting the lenght of the pivot point on the pivot arm.
I believe I have the same issue, or maybe not since with diff unlocked both wheels jacked the opposite goes the other way.
With lock engaged holding one wheel the other cannot be turned.
Initially the lock light would not go out.
This is like the 2nd or third test drive on the road after taking vehicle apart bolt by bolt panel by panel new bolts new paint rear diff rebuilt new axles etc.
The diff lock was always hard to move R & L which I thought was normal?
Now it goes easily right & left in & out of lock.
Maybe I just had a stuck light.
Maybe I need to remove cover & look.
I just got all that back together, 5 years.
Thanks
