DIFF GUARDS + JACKING

bongo1

Active Member

Posts

462

Location

MACCLESFIELD cheshire

• Nov 14, 2019

• #1

I know it says you can jack up on the diff case , but can you jack if you have diff guards fitted , or will it put to much strain on the bolts holding it on .

 

My Old Landy

Keep breathin'

Full Member

Posts

9,098

Location

North Lincs

• Nov 15, 2019

• #2

bongo1 said:

I know it says you can jack up on the diff case , but can you jack if you have diff guards fitted , or will it put to much strain on the bolts holding it on .

Click to expand...

An interesting question that will probably get yes and no answers!! I will start by saying that I have used the diff guard but have since jacked up either side near the hub. There is an adaptor that sits offset to allow a central jacking point available (or you can make it) that I will be getting.

 

payydg

Well-Known Member

Posts

3,907

Location

Aberdeenshire

• Nov 15, 2019

• #3

Probably would be fine as a one off in an emergency but I wouldn’t do it regularly. Saying that some will probably be along saying they’ve been jacking that way for 20yrs so what do I know.

 

bongo1

Active Member

Posts

462

Location

MACCLESFIELD cheshire

• Nov 16, 2019

• #4

Mine appear to bolt to the diff itself , unlike some sort of clamp around it .

 

Attachments

• 
  IMG_20191115_160000118.jpg

  207.4 KB · Views: 69
• 
  IMG_20191115_171819285.jpg

  304.5 KB · Views: 115
• 
  IMG_20191115_171832016.jpg

  273.6 KB · Views: 84

bongo1

Active Member

Posts

462

Location

MACCLESFIELD cheshire

• Nov 16, 2019

• #5

Found this picture on here , bit prettier than mine .

 

Attachments

• 
  DSCN2321.jpg

  58.4 KB · Views: 64

Knappster

Well-Known Member

Full Member

Posts

3,594

Location

Stroud

• Nov 16, 2019

• #6

I had QT diff guards on my old disco 1 and used to jack them to raise it to change wheels. No issues. I’m not aware of any guidance to say yes or no though. Perhaps QT can give a diffinitive (no pun) answer.

 

goonarmy

Beer tester

LZIR Despatch Agent

Posts

44,865

Location

Hornchurch

• Nov 17, 2019

• #7

I had the paddocks diff guards which covered the diff plate. I wouldn't Jack off them, just Jack the axle. Easier to get to as well.

 

bongo1

Active Member

Posts

462

Location

MACCLESFIELD cheshire

• Nov 19, 2019

• #8

I tend to jack off the axle but its handy to jack under the guard , i only worry as its supported by 4? bolts (i think) all the weight is going onto those studs .
But it should be ok if they are designed to be strong enough to hit rocks and protecting the diffs . QT do look tough .