Diff front oil seal replacement

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

Landyfella

Active Member
Posts
162
Location
Cambridge
HI, I’m having trouble removing the front oil seal on the rear diff. I don’t really want to take the whole diff apart. Are there any knacks/tips on how to get it out.

For some reason it won't allow me to upload the photo

EZcWzZVh9iVJo8mr0ouvglUBzpQ_PTRR0SViHz82q35GHw
 
Last edited:
My old method used for many years was just a big screwdriver across the face of the seal passing the side of the shaft and hooking under the seal lip. A whack on the handle pops the seal out
Recently I have used an oil seal removal tool, Find on the Fleabay
 
I was going to say if it is the original metal one they are fun to get out. I thought I had broken something when I took the first one out because It broke and I thought I had chewed up a spacer. I think I just used a screwdriver and a hammer, lots of swearing. No really, lots and lots of swearing.
 
The original seals can be a cow - they were made properly, and will have grown in to the casting over the years - so significant force and plenty of blue air is often required :rolleyes:..

OP - I thought Bergen tools were "OK" - I'd see if you can send that back .. lets them know it was rubbish, and then you can get a better one ;)
 
Land rovers do give you a good like in swears and, on occasion, the chance to make up new ones when the existing ones just don't cut it.
 
You must log in or register to reply here.

Similar threads

I
Series 3 Diff Pinion Spacer
Replies
7
Views
436
steve2286w
steve2286w
S
Timing cover oil seal replacement
Replies
2
Views
683
sprie
S
D
Front diff/axle housing covered in oil
Replies
7
Views
828
Doogal Too
D
S
layshaft - why no oil seal
Replies
4
Views
546
tottot
tottot
S
Removing oil seal on engine front cover
Replies
2
Views
594
steve2286w
steve2286w
Back
Top