Freelander 1 Didn't think this was possible

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
@GrumpyGel you note the small hole between the wheel nuts? These ones do fit.
Here is my V6
DSCF0606_zpsgn9iqajf.jpg
 
It could have spacers behind the wheels. They only have to be 5mm thick iirc, for the earlier 15" rims to fit.
The spare is a Triple Sport, possibly a 17" looking at the tyre sidewall.
 
RealBeale said:
It's a 2000 year car so yes they would fit. Very early V6's had the earlier brakes.
Click to expand...
What a hotch-potch!

So it'll have the same brakes at the wheels as an early K or L Series - but the servo is the later one - or at least the brake fluid reservoir is attached to the bulkhead like later ones as opposed to being attached to the servo as on the earlier ones.

I wouldn't like to have to buy parts for it!
 
When I got my '01 K Series car it had identical wheels as my '99 L Series. It was only after a previous thread about these 15' wheels that I went out and compared the 2 - and bugger me, the K had an extra spoke!
 
htr said:
So you have a set of 6 spoke 15' rims? :)
Click to expand...
I do, but if you're after them it would make the parts car rather immobile. I suppose I could take bits off it and send the rest for scrap - which I'll have to do at some point - but I'll have to decide what I want to keep and where I'm going to put the bits!
 
GrumpyGel said:
Probably no worse than mine - I did try to strip the part car's seat (to use the passenger seat squab) - which sounded easy in Rave - but practice was rather confusing! I'll have another go this weekend.
Click to expand...

If you want a hand, I am free Sunday. Saturday is about daughter's washing machine - cannot wait!
 
Tony Reeves said:
If you want a hand, I am free Sunday. Saturday is about daughter's washing machine - cannot wait!
Click to expand...
That's very kind of you Tony. Yeh, would be great :) I'll make sure we're stocked up on cakes and coffee again :) I'll also make sure, as much as possible, that my tools are in known places!!! I'll be around all day - when ever suits is great.
 
It's possible to swap the seat squabs L to R and R to L.
I'm planning to do this on my HSE seats to prolong the leather.
 
GrumpyGel said:
That's very kind of you Tony. Yeh, would be great :) I'll make sure we're stocked up on cakes and coffee again :) I'll also make sure, as much as possible, that my tools are in known places!!! I'll be around all day - when ever suits is great.
Click to expand...
It is date! Will PM you tomorrow evening once I see how the weather is going to be.
 
You must log in or register to reply here.

Similar threads

GrumpyGel
Freelander 2 (LR2) Replacement Remote Fobs
Replies
4
Views
1K
GrumpyGel
GrumpyGel
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
366
xDParis64
xDParis64
P
Is it always like this ?
Replies
7
Views
269
Kev12
Kev12
GrumpyGel
P38A Thought I'd venture in cos...
Replies
6
Views
864
Gord Wedman
G
J
Introduction and PAS problems...
Replies
1
Views
681
JakeFrost
J
Back
Top