Depressing news from the garage - What to do?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
yes , as rear main oil seal is clamped with a gasket to block face and rear main bearing , its not inkown for the ali seal housing to warp allowing oil leak in the same place , i use silicone to seal main brg cap and joints
 
jamesmartin said:
yes , as rear main oil seal is clamped with a gasket to block face and rear main bearing , its not inkown for the ali seal housing to warp allowing oil leak in the same place , i use silicone to seal main brg cap and joints
Click to expand...

That would actually make a lot of sense, because the T seals look ok to me and I made a real effort to check and double check them.

I had assumed that the oil seal would cause a leak into the bell housing, but it seems to be more likely than T seals.

Well I'm definitely not dropping the gearbox on my driveway and I guess that if the gearbox is out, I may as well get it sorted at the same time.


Sorry James, I should really know this by now, but do you still refurb gearboxes? I've never noticed you mentioning your business on here so can PM if you prefer, but I would much prefer to send the business your way if you can/would be willing to take this on, and assuming that the garage will agree to me choosing where the gearbox is sent!
 
the seal itself leaking would leak into bellhousing ,but a leak from the ali housing / gasket would leak from between bellhousing and engine
 
jamesmartin said:
the seal itself leaking would leak into bellhousing ,but a leak from the ali housing / gasket would leak from between bellhousing and engine
Click to expand...

This is definitely starting to sound like the problem and would explain why SO much oil is pouring out.

I will relay this to the garage, but I guess it's a gearbox out job anyway...
 
Ffs, pull yourself together man, and go to a different garage, it strikes me that they dont really know what they are doing, did they suck in through their teeth when they broke this depressing news to you?

Since when has a bump stop been an MOT failure? Mine has been missing two at the back for the last three MOT's, its never even been an advisory.
 
Its good to see other member rallying around to help someone out
this is what makes the forum worth while

I have spare rear shock bush's new if you need them
 
nobber said:
Ffs, pull yourself together man, and go to a different garage, it strikes me that they dont really know what they are doing, did they suck in through their teeth when they broke this depressing news to you?

Since when has a bump stop been an MOT failure? Mine has been missing two at the back for the last three MOT's, its never even been an advisory.
Click to expand...

I like this garage. They have always been very honest with me, I get a discount on labour and it's walking distance from my office.

The closest alternatives are around 20 mins away, which is not practical.


But point taken on pulling myself together.... :rolleyes:
 
greyhair said:
Its good to see other member rallying around to help someone out
this is what makes the forum worth while

I have spare rear shock bush's new if you need them
Click to expand...

Agreed. For all of the p!ss taking and banter, there are an amazing bunch of people here!

My shock bushes are ok because I replaced them a few months ago, but thanks for the offer! :D
 
Chr1s said:
I like this garage. They have always been very honest with me, I get a discount on labour and it's walking distance from my office.

The closest alternatives are around 20 mins away, which is not practical.


But point taken on pulling myself together.... :rolleyes:
Click to expand...

In that case do what you can yourself, my first thing would be to remove the sump and make sure its sealed up properly, the seals between tranny and gearbox is a fairly easy thing to do, if you do have to remove the gearbox its not as awfull as it sounds. A large percentage of doing jobs like this is having the confidence to do them, if you havent done it before I can understand you being hesitant, if you have done it before its usually a case of ''bloomin hell, here we go adain''.
 
You must log in or register to reply here.

Similar threads

AH-4x4
Help ending my leak - 200TDI
Replies
10
Views
522
AH-4x4
AH-4x4
G
Durability of the 12J engine ?
Replies
0
Views
132
grewth
G
M
Spitting output housing from Transferbox
Replies
13
Views
379
tottot
tottot
J
Defender 300 Tdi Engine Swap
Replies
4
Views
862
jer_300Tdi_90
J
P
Mot and oil leaks
Replies
8
Views
1K
paul griggs
P
Back
Top