chrisstdt
Well-Known Member
- Posts
- 923
- Location
- scottish borders
That explains why the old vice is now in two bits !
Defender steering wobble when hitting pot holes
- Thread starter chrisstdt
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bluedog333
Well-Known Member
- Posts
- 5,436
- Location
- Henley on Thames, Oxfordshire
That and the “Draper” part! Record are obviously good. I’d recommend trying to get an older one 2nd hand, they don’t make’m like they used to.
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
@chrisstdt , have you resolved your death wobble? It's always good to see the fix for this issue.
Re' panhard rod bushes, I ended up mapgas'ing them out and having to hacksaw through the outer metal sleeve and carefully cold chiseling out - even with the 20t press they weren't budging! These were the toughest old bushes to remove I've encountered. All cleaned up, a resprayed panhard, greased and new SuperPro bushes fitted...
Re' panhard rod bushes, I ended up mapgas'ing them out and having to hacksaw through the outer metal sleeve and carefully cold chiseling out - even with the 20t press they weren't budging! These were the toughest old bushes to remove I've encountered. All cleaned up, a resprayed panhard, greased and new SuperPro bushes fitted...
chrisstdt
Well-Known Member
- Posts
- 923
- Location
- scottish borders
Yes there was a small amount of wear in one of the bushes ,both now replaced and wobble has gone ,amazing how such a small amount of wear could cause such a wobble !
I got the bushes moving with a hammer and got the first out with the vice but had to go to my mates to use his vice for the second
I got the bushes moving with a hammer and got the first out with the vice but had to go to my mates to use his vice for the second
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
Good result...
Similar threads
