jwgmiller
Member
- Posts
- 24
- Location
- baw deep in snaw in scotland
Cheers
Last edited:
Defender steering wheels
- Thread starter jwgmiller
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I got this one for mine: LEATHER STEERING WHEEL & BOSS KIT FIT LAND ROVER DEFENDER 90 110 130 200 300 TDI | eBay
The dish of the wheel brings it very high, especially with the long boss kit but I like it, and it was cheap enough to take a punt. I have about 8 inches of knee room with it, before I had none.
They also sell shorter boss bits and non-dished steering wheels, which would mean you could reach the indicators but have probably half the knee clearance.
The dish of the wheel brings it very high, especially with the long boss kit but I like it, and it was cheap enough to take a punt. I have about 8 inches of knee room with it, before I had none.
They also sell shorter boss bits and non-dished steering wheels, which would mean you could reach the indicators but have probably half the knee clearance.
Barbados
Active Member
- Posts
- 947
- Location
- Look at my name DUH LOL
Before you look at brand and best, you have to note that there are two different types of types of splines for defenders depending on year.
As for brands, can't say any is best, there are many good quality manufacturers like Momo, Sparco, Mounty to name a few. Styles of wheel will depend on you and your taste. If you are shortish and like a lighter turning effort, you would want a wheel that's lower to the indicator stalks and closer to a stock wheel diameter.
Depending on how tall or short you are, the steering wheel height will determine comfort and effort too. I am tall so will go with a smaller wheel which sits as low as it can on the steering colum splines. I have one which I acquired in a package purchase, I don't like the height nor wheel thickness but will machine a spacer to make it sit lower.
Spacer will sit at the bottom of the hub with wheel below...not a conventional set up, but it will work for now if I don't get one before the end of my rebuild.
There was a thread here quite recent as well regarding steering wheels, you should do a search.
As for brands, can't say any is best, there are many good quality manufacturers like Momo, Sparco, Mounty to name a few. Styles of wheel will depend on you and your taste. If you are shortish and like a lighter turning effort, you would want a wheel that's lower to the indicator stalks and closer to a stock wheel diameter.
Depending on how tall or short you are, the steering wheel height will determine comfort and effort too. I am tall so will go with a smaller wheel which sits as low as it can on the steering colum splines. I have one which I acquired in a package purchase, I don't like the height nor wheel thickness but will machine a spacer to make it sit lower.
Spacer will sit at the bottom of the hub with wheel below...not a conventional set up, but it will work for now if I don't get one before the end of my rebuild.
There was a thread here quite recent as well regarding steering wheels, you should do a search.
jwgmiller
Member
- Posts
- 24
- Location
- baw deep in snaw in scotland
Ta
Last edited:
Barbados
Active Member
- Posts
- 947
- Location
- Look at my name DUH LOL
Some guys use 14' 13 or even 12 inch diameter wheels, I would go for 14 or 13
Barbados
Active Member
- Posts
- 947
- Location
- Look at my name DUH LOL
If you look at my thread here http://www.landyzone.co.uk/lz/f7/sandy-landy-will-rebuilt-just-make-her-new-again-276925-2.html
You will see the 15" Mountney wheel I currently have.
You will see the 15" Mountney wheel I currently have.
Here is a pic of mine
From this thread: http://www.landyzone.co.uk/lz/f7/ninety-steering-wheel-249220-2.html#post3351579
From this thread: http://www.landyzone.co.uk/lz/f7/ninety-steering-wheel-249220-2.html#post3351579
Barbados
Active Member
- Posts
- 947
- Location
- Look at my name DUH LOL
This is how the one I have sits now, not the way it was intended to but how it will fit after I machine a spacer between the hub and the wheel.
I have attached some bolts to measure the wheel to stalk depth checking for clearance, comfort, safety and practically.
I have attached some bolts to measure the wheel to stalk depth checking for clearance, comfort, safety and practically.
Attachments
jwgmiller
Member
- Posts
- 24
- Location
- baw deep in snaw in scotland
Scary but as normal
Last edited:
- Posts
- 83,282
- Location
- Embasinga stocæ
jwgmiller
Member
- Posts
- 24
- Location
- baw deep in snaw in scotland
?
Last edited:
- Posts
- 83,282
- Location
- Embasinga stocæ
cant you count them?
jwgmiller
Member
- Posts
- 24
- Location
- baw deep in snaw in scotland
I can count one
Fud thats you
Bolt
Fud thats you
Bolt
- Posts
- 83,282
- Location
- Embasinga stocæ
op2:jwgmiller
Member
- Posts
- 24
- Location
- baw deep in snaw in scotland
Same internet forum dicks all the same
blackstrat
Well-Known Member
- Posts
- 9,265
- Location
- East Anglia
- Posts
- 83,282
- Location
- Embasinga stocæ
yu come on, dont say what model vehicle you have, ask about a steering wheel, someone posts a link, which it transpires isnt for your year or model, but you buy it and then whinge when it doesnt fit and ask us how many splines are on the steering of your car, when you have to take the wheel off anyway?
that sounds like a sensible thing to do
I have a sneaky suspicion he aint gonna stay long
that sounds like a sensible thing to do
I have a sneaky suspicion he aint gonna stay long
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,113
- Location
- Gloucestercotshirewolds
most likely had a sh it day, plumbers come home smelling of poo, Electricians come home smelling of money.
https://www.youtube.com/watch?v=mViO9mnCTBo
https://www.youtube.com/watch?v=mViO9mnCTBo
