defender lost drive

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

dbrw1

New Member
Posts
18
Right people. my rear hub has worn which enables the rear halfshaft to slide out of the diff. When this happens i loose all drive unless i put it in diff lock? is this normal? thought i would be able to get home with just the front wheels driving?

or is that not how they work?

Thanks
 
Sounds as though you need a replacement hub flange and possibly a new half shaft.

They are cheap and easy to replace, so do them both.
 
Yep just the hub has lost half its teeth and it has spun a little bit of the splines of the diff end so will do both. Put some welds on the splines hub end for the minute until I get new ones.

Cheers fellas
 
The hub doesn't have teeth! That's the bit that spins rounf with your wheel on it!

If your spline has gone at the diff end, you will need to drain and flush the diff, otherwise you will have bits of metal floating arond inside!

However, if the flange has lost some teeth and the shaft has worn down, you are preparing yourself for a big bill by welding them together!

The shaft was designed to float in the flange, which is why it has been made as it is!

Don't be a tightwad and spend a few quid now to potentially save you a lot of money later!
 
I haven't welded the flange to the half shaft? I've put some welds on the splines inside of flange to stop it sliding out to far. It still floats.

And I've only done it to get to work, going to pick a half shaft and flange in a minute.
 
You must log in or register to reply here.

Similar threads

Duncydoo
Help lost drive on way to carfest…
Replies
4
Views
603
miktdish
miktdish
J
TD5 defender Vibration
Replies
3
Views
652
chrisstdt
chrisstdt
seanlandy
Defender 1990 queries
Replies
8
Views
443
seanlandy
seanlandy
D90 Td5
Aftermarket Hubs
Replies
3
Views
606
D90 Td5
D90 Td5
T
Defender front wheel not spinning.
Replies
2
Views
528
miktdish
miktdish
Back
Top