Defender drop arm

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
the murfster

the murfster

Member
Posts
49
Location
tamworth
Had td5 90 vague steering for a while could not find the issue till today.
The drop arm was loose on the box even though the lock tab was in its proper position.
Got the half inch snap on basher gun on it that took it up two full threads,took all the play out of it now a far better drive (thank god) not scary like it was.
Anybody had this come loose before.
 
Yeah it happens.

Must be tightened to 176nm. Driven, checked, re tourqed at least twice.

Then knock the washer in place again.

I did mine up with my buzz gun, then torqued if. Wasnt tight enough, drove around for a couple days and had come a touch loose.
 
bankz5152 said:
Yeah it happens.

Must be tightened to 176nm. Driven, checked, re tourqed at least twice.

Then knock the washer in place again.

I did mine up with my buzz gun, then torqued if. Wasnt tight enough, drove around for a couple days and had come a touch loose.
Click to expand...
That's great thanks for the reply,think my torque wrench goes upto 110nm.
Was thinking of upgrading to a bigger torque wrench maybe nows the time.
 
If it’s driven for a while with it slack I think the arm wears and you will keep tightening it until the arm touches the bottom of the box. Mine did anyway
 
Just a note on the torque wrench - the aldi (and perhaps the Lidl one) go up to 210nm. If you only want it for occasional use it may be worth considering. I think the price is around £20 (may be slightly more), but I got mine for £15. I actually have two as I decided to get one to keep in my car as it was as cheap as a wheel brace.
 
You must log in or register to reply here.

Similar threads

1
Steering / suspension ideas
Replies
16
Views
1K
110Matty
1
Officerdibble
Diff lock / high low range
Replies
9
Views
1K
D1Nut
D1Nut
Paul Coddington
P38A 2.5 DT manual Clutch Slave
Replies
6
Views
396
Paul Coddington
Paul Coddington
O
wheel bearing questions
Replies
4
Views
505
Ollie_Mif
O
J
Help please! Electrical issue with 1995 Defender 110 County, 300 tdi
2
Replies
35
Views
1K
Oliverryan96
O
Back
Top