harrytooth
Member
- Posts
- 84
- Location
- sussex
Defender doors Good or Bust ?
- Thread starter harrytooth
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Looks like you have lost the ali that would have been wrapped back around the edge on that corner.
Not sure what you can do to fix that.
Cheers
Not sure what you can do to fix that.
Cheers
harrytooth
Member
- Posts
- 84
- Location
- sussex
Ok thanks, do you think I need new doors?
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
I was thinking , maybe if you are not too fuzzy you could try some two pack epoxy to glue the outer back to the door frame, preferably after you have welded the door frame with a new section in it.
New doors are generally very expensive.
Cheers
New doors are generally very expensive.
Cheers
- Posts
- 14,902
- Location
- Doncaster
Door repair section
Door skin
I recommend YRM for the door repair section, I used them on mine. No idea about the skins from ebay, I haven't used them, but I have seen them after fitting and done properly you can't tell any difference!
Door skin
I recommend YRM for the door repair section, I used them on mine. No idea about the skins from ebay, I haven't used them, but I have seen them after fitting and done properly you can't tell any difference!
- Posts
- 11,023
- Location
- North of the Wall
What's being fuzzy got to do with it?I was thinking , maybe if you are not too fuzzy you could try some two pack epoxy to glue the outer back to the door frame, preferably after you have welded the door frame with a new section in it.
New doors are generally very expensive.
Cheers
If you are fuzzy, you could take the skin off, weld new sections in, paint frame, then put a new door skin on. LINKY scroll down the page a bit to the skins.
harrytooth
Member
- Posts
- 84
- Location
- sussex
Thanks i think i will try this
- Posts
- 11,023
- Location
- North of the Wall
Do it with a clear head
I agree with Paul D about the parts from YRM. Haven't used their door repair sections, but used a lot of their other stuff.
harrytooth
Member
- Posts
- 84
- Location
- sussex
Will do, thanks for everyone's helpDo it with a clear head
I agree with Paul D about the parts from YRM. Haven't used their door repair sections, but used a lot of their other stuff.
harrytooth
Member
- Posts
- 84
- Location
- sussex
looking at the doors today i decided to buy new ones, 5 doors will be up for sale if anyone is interested
- Posts
- 11,023
- Location
- North of the Wall
That's mint, GATSO.if you want repair parts to fit perfect first and everytime Y. ou R. eally M. ust use,,,,,,YRM,,,,,,,,
I think you should try to sell them that strap line. Or, swap it for loads of parts!
harrytooth
Member
- Posts
- 84
- Location
- sussex
yeah i will sell them probably, i need to get 3 middle row seat frames for my defender but can't find them anywhere, have you got any ideas?That's mint, GATSO.
