defender door rebuild

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
When I rebuilt my doors I didn't put them back in. I put new window guides in, bought from SP Land Rover, and my windows are nice and tight.
 
When i rebuilt mine I just used the old shims. I guess at worst the windows would be loose. I think I've got some spare ones somewhere if you are desperate
 
Hey all,

As I have sprayed the whole car I also removed the internal lining of the doors to check their state and all doors are in pretty good shape (1996 built) I am not stripping off the skin nor repainting the steel structure and the skins separately - I just left it as it was and sprayed it inside out.

Now before putting the lining back I have been thinking of what to do to lengthened their lifetime and reduce the noise they do during travel

I plan to:

1) apply PU sealant between steel and alu where I can see some gaps so to 'isolate' the two materials OR do you feel is better to leave it alone ?
2) apply Waxoyl across the structure door through the various holes present
3) apply insulation material across the door (see pic attached)

Would appreciate to hear your thoughts on this?
 

Attachments

  • doors.png
    doors.png
    204.9 KB · Views: 133
You must log in or register to reply here.

Similar threads

W
Heater rebuild and motor lubrication.
Replies
0
Views
173
Wolf Pack
W
R
unknown key barrels
Replies
3
Views
234
Anaconda
A
dag019
Second row door cards
Replies
0
Views
355
dag019
dag019
julianf
88 sides - upright bit by the door? (110 csw fitttment)
Replies
2
Views
309
rubix101
R
A
90 / 110 door striker
Replies
6
Views
585
APLandy
A
Back
Top