easy easy mod. the mounts are exactly the same distance apart, the only difference is fenders are horizontal and discos vertical. I done a standard fender bumper to a disco not long ago. I cut the U shaped mount - just the three sided bit that actually bolts to the disco chassis rails off the back of a disco bumper - not the entire box that they're fixed too, as they wouldn't fit into the back of the standard fender bumper easily. These will then weld directly on top of the fender mounts in the correct orientation, possibly with some stregthening brackets, and it'll be roughly the right distance from the wagon as well. You will want to angle the ends of the bumper in towards the vehicle as well, else its too flat and will look very odd, but this is just four v cuts, lean on it in a vice and a splash of weld.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
